Samsung SCC-C7453N user manual  Auto SET Sets the pattern and scan

ALARM IN SET : Select the alarm sensor operation between <NO>, <NC> and <OFF>.

ALARM OUT SET : Set the alarm out port matched to the alarm input port.

AUTO SET : Sets the pattern and scan

	action for the corresponding alarm	ALARM1	AUTO SET
	input. When the alarm is generated, the		OFF
		ALARM2	OFF
	camera moves to the preset position	ALARM3	OFF
	coupled to the corresponding alarm.	ALARM4	OFF
	Presets 1 ~ 8 are coupled with alarms	ALARM5	OFF
		ALARM6	OFF
	1 ~ 8 inputs respectively, and the preset
		ALARM7	OFF
	9 is coupled to the motion detection.	ALARM8	OFF
	The camera stops and remains in the	MOTION	OFF
	corresponding preset position for the
	defined <DWELL TIME>, and performs
	pattern or scan action defined by the <AUTO SET>. Setting to <OFF> will
	discard with the pattern or scan action after moving to the preset position.
	- PATTERN 1 ~ 3 : Defined pattern action
	- HALF1 : Patterns 1 and 2 in serial action
	- HALF2 : Patterns 2 and 3 in serial action
	- WHOLE : Patterns 1, 2 and 3 in serial action
	- SCAN 1 ~ 4 : Predefined SCAN action
M	 The <ALARM1> is used as external switching signal if the <DAY/NIGHT> is set to
	<EXT>.

English

AUX OUT CONTROL : Sets whether to sustain the alarm output despite of the alarm generation or to output alarm out signal while the coupled alarm is alive.

When selected <OFF>, outputs alarm only if the alarm is generated. When selected <ON>, it always outputs alarm out signal despite of the alarm generation.

	AUX OUT CONTROL
OUT1	OFF
OUT2	OFF
OUT3	OFF

English _45

00956B-NA_SCC-C7453N-ENG.indb 45 2009-08-13 오후 10:58: