VBrick Systems VB5000, VB6000, VB4000 manual Recorder State

VBStar

Recorder State	Displays the state of the recorder. Values can be
	Failed
	Stopped, never started
	Stopped, by user
	Stopped, Disk Full (less than 100 MB remains)
	Stopped, File Size Limit (approximately 4 GB)
	Stopped, FTP Overrun
	Stopped, Duration Complete
	Stopped, Unformatted
	Stopped, IO Error
	Stopped, File Is Pumping
	Running, From Power Up
	Running, Scheduled
	Running, User Initiated
Recorder Mode	Reports the Recorder mode, User Controlled, Start Record on
	Power-up, or Scheduled.
User Controlled	The user controls which files to record and send to which
	configured server.
Start Record on	When the appliance is powered up, the recorder will automatically
Power-up	start.
Scheduled	The files will start recording at the scheduled time.
Receive IP Address	The address of the video source. If unicast, this is the same as the
	sender's source IP address.
Recorder File Name	File name to be recorded.
File Start Time	Starting time of the recording.
Data Recorded	Reports the number of bytes currently recorded.
File in Progress	Name of the file currently being recorded.
FTP Status	The status of the Hard Drive FTP send. Values can be:
	Transfer in Progress
	Idle
	Invalid FTP Server
	Invalid User Name
	Invalid User Password
	Local File Open Error
	Socket Open Failure
	Transfer Failure
	Socket Quit Failure

VBrick MPEG-2 Appliance Admin Guide 111