VBrick Systems VB6000, VB4000, VB5000 manual Configuration Decoder Audio

Page 27
Configuration: Decoder > Audio

MPEG-2 Configuration

Actual PID

Actual PID being played. This read-only parameter is of interest when the user selects automatic. A value of 8191 indicates the PID has not yet been established.

Configuration: Decoder > Audio

The audio selection provides for the control and configuration of the decoded audio stream.

Output Mode

The audio output mode can be one of five possible setting as shown

 

below. Stereo directs the incoming left audio channel to the left

 

output, and the incoming right audio channel to the right output. Mix

 

combines the left and right audio channels and directs the combined

 

output to both the left and right audio channels. Left selects the input

 

left audio channel and sends it to both the left and right output

 

channels. Right selects the input right audio channel and sends it to

 

both the left and right output channels. Mute suppresses audio

 

output. The Dual to options are only operational on an input stream

 

that was encoded in Dual audio mode; otherwise, the Output Mode is

 

determined by the corresponding audio encoder setting.

 

Dual to Stereo

 

Dual to Mix

 

Dual to Left

 

Dual to Right

 

Mute

 

 

Output Level

Hardware-dependent; not shown on all models. Changes the range of

 

values for Left and Right Gain.

 

Normal – 14 dB to -48 dB (+14 to -48 on some decoder models).

 

Alternate – 8 dB to -54 dB (+14 to -48 on some decoder models).

 

 

Left Gain

Used to adjust volume. Default = 0.

 

 

 

VBrick MPEG-2 Appliance Admin Guide

19

Image 27
Contents VB4000-5000-6000 Series Network Video Appliances VBrick v4.1 MPEG-2 Appliance Admin GuideCopyright FCC NoticeAbout VBrick Systems 1. Introduction ContentsMPEG-2 Admin Guide 2. MPEG-2 Configuration4. Status 3. SDI Configuration8. VBStar 5. Diagnostics6. Maintenance 7. Maintenance ModeIndex MPEG-2 Admin Guide OrganizationGetting Help Font Conventions Printer-FriendlyItalics are used to emphasize specific words or phrases VBSSM IntroductionChapter OverviewModel Mixed Model AppliancesArchiver and Recorder Functionality ConfigurationIntroduction Figure 1. Archiver/Recorder Functionality2007 VBrick Systems, Inc MPEG-2 Overview MPEG-2 ConfigurationOptimizing MPEG-2 Performance OptionApplicable Model Decoder MPEG-2 Configuration RecommendationsAbsolute Maximum Transport Rates Dest1, Dest2Recorder Configuration Network Ethernet Configuration Networkcan be letters, numbers or hyphens Gateway IP AddressConfiguration Network Routing Domain Name ServerNetwork Time Synchronization Routing Method Configuration Network Management Configuration Network IPv6 Configuration BillboardBillboard FTP Using the BillboardRemote URL Billboard URLsBillboard File Types Local URLTransparent Background Creating a BillboardVideo Input Font SizesConfiguration Decoder Configuration Decoder Videoapplying this parameter will cause the VBrick to reset Configuration Decoder Audio Configuration Decoder Network Receive Address Configuration Decoder Picture-In-Picture Picture in Picture Configuration Encoder Transport Configuration EncoderConfiguration Encoder Video Video Format \h or \H - Host Name \d or \D - Current Date\t or \T - Current Time Reference Distance Configuration Encoder Audio Audio Input Configuration Encoder Destination 1/Destination2 Destination Address Configuration Encoder Announce SAP support replacement characters. The replacement text is only shown in Announce Common Informationfollowing string IPMask=xxx.xxx.xxx.xxx where SAP for Destination 1 and/orConfiguration Encoder Text Insertion Configuration Conferencing Configuration PumpConfiguration Recorder Configuration FTP File TransferConferencing Configuration Passthrough COM1 Configuration PassthroughPassthrough State Responder Passthrough State Initiator Destination Configuration System Configuration Passthrough COM2Dedicated Address Mode this window Configuration System GeneralSystem parameters before you can enable Network Time Synchronization onFront Panel LCD Display Configuration System SNMP TrapsProgram Files\VBrick\VB6000\Download\ReleaseVxxxxxx Event Description NumberEvent Description Improving Security Configuration System SecurityConfiguration System Logging Configuration Video On Demand Configuration Script Management Configuration Script Management Event TriggeringRun Scripts Using IWS Figure 2. Script Management - Part Run Scripts Using the IR Remote Control Run Scripts Using Event TriggersSample Script Scripting Notes Configuration Script Management Auto ConfigurationXML Header Introduction SDI ConfigurationVertical Offset Correction SDI Audio Input 2007 VBrick Systems, Inc Status System Information StatusSystem Model Status Network Status Codec Status Network Statusor 100Mbit GeneralInterface Status Network Status RoutingStatus Decoder Status Status Network Status Network Time Status Network Status IPv6MPEG-2 Decoder Status Decoder State Status Encoder Status MPEG-2 Encoder Status Status Hard Drive StatusStatus Hard Drive Status General Network Status Hard Drive Status PumpStatus Hard Drive Status Recorder Status FTP Server Status Status System Log Status System Log ConfigStatus System Log Traps Status System Log System EventStatus User Information Status System Log System InfoStatus User Information Main Board Status User Information Slot1/Slot2 User Information Version 2007 VBrick Systems, Inc Diagnostics Network Tests Ping Test DiagnosticsDiagnostics Network Tests User DiagnosticsDiagnostics Network Tests Trace Route Test Trace Route Test Results Diagnostics Network Tests Data Test Diagnostics Device Test Diagnostics Decoder Color Bars Diagnostics Hard Drive 2007 VBrick Systems, Inc Maintenance Device Information MaintenanceMaintenance Default All Configuration Maintenance Read/Write ConfigurationMaintenance Read/Write Read From Device Read Configuration Data from Device Maintenance Read/Write Write To Device Maintenance Change Usernames & Passwords Maintenance Usernames & Passwords Change Usernames & PasswordsWrite Configuration Data to Device User Name User Level Maintenance Usernames & Passwords Change SNMPv3 PasswordsDefault User Name Default PasswordUser Name Maintenance Mode Maintenance Mode Features Maintenance Mode IndicatorsMaintenance Mode Limitations ex or exit Maintenance Mode CLI OperationCommand EntryCommand VBStar Recording vs. Archiving VBStar PumpConfiguration Pump General store files on the C drive. The C drive has limited space and isreserved for VBrick firmware Configuration Pump Destination See MPEG-2 Configuration Encoder Announce SAP on page Configuration Pump Announce SAPConfiguration Pump Operation Recording Batch Files Using Mixed ModelsVBStar Record Filename Syntax RulesBatch Wrap Point and Record Duration Configuration Recorder General FTP Server Enable Configuration Recorder Network Configuration Recorder Operation Recorder State VBStar FTP File Transfer Configuration FTP File Transfer ServersFTP Server Configuration FTP File Transfer TransfersFTP Status FTP Queue Operation VBStar Status2007 VBrick Systems, Inc Index Page Page Wallingford, Connecticut 06492, USA VBrick Systems, Inc 12 Beaumont Road
Related manuals
Manual 86 pages 2.72 Kb Manual 156 pages 46.18 Kb