VBrick Systems VB5000, VB6000, VB4000 manual Trace Route Test Results

Diagnostics

Operational State	The currently selected test.
Address Mode	Select IP Address or Host Name and enter a corresponding value.
IP Address or Host	Enter the information in the corresponding box.
Name
Probe Count	Can be set from 3 to 20. The default setting is 3. This setting is the
	number of probe packets sent to a host at each hop.

Trace Route Test Results

The results of the test appear at the top of the screen. The results include the Resolved IP Address of the Destination Host Name. When the test is finished or stopped, the Overall Result will display the result of the test, such as "Test Done," or "Max hops (=30) Finished," or "Test Stopped," etc. An entry shows the hop number, which is equal to the TTL, IP address (and Host Name if available) of the gateway, and round trip time of each probe. If the probe answers are received from different gateways, the address of each responding system will be shown. If there is no response within a 5 second timeout interval, a "*" is printed for that probe. If the result string exceeds 255 characters, the string will be terminated by ending it with "Too Long."

VBrick MPEG-2 Appliance Admin Guide 81