VBrick Systems VB6000, VB4000, VB5000 manual Configuration Encoder Video

Page 33

 

 

MPEG-2 Configuration

 

 

 

 

 

 

 

Audio PID

MPEG-2 transmits its data in packets of 188 bytes each. At the start

 

 

of each packet is a packet identifier (or PID) that identifies the data

 

 

stream associated with that packet. It is possible that a non-VBrick

 

 

decoder may only accept audio streams with a certain PID setting. If

 

 

so, then this feature allows compatibility with these decoders.

 

 

 

 

Video PID

MPEG-2 transmits its data in packets of 188 bytes each. At the start

 

 

of each packet is a packet identifier (or PID) that identifies the data

 

 

stream associated with that packet. It is possible that a non-VBrick

 

 

decoder may only accept video streams with a certain PID setting. If

 

 

so, then this feature allows compatibility with these decoders.

 

 

 

 

PCR PID

MPEG-2 transmits its data in packets of 188 bytes each. At the start

 

 

of each packet is a packet identifier (or PID) that identifies the data

 

 

stream associated with that packet. It is possible that a non-VBrick

 

 

decoder may only accept PCR (Program Clock Reference) streams

 

 

with a certain PID setting. If so, then this feature allows compatibility

 

 

with these decoders. Note that certain decoders may require the PCRs

 

 

to be embedded in the video stream. If so, these decoders are not

 

 

compatible with the VBrick encoder.

 

 

 

 

Destination 2

The user can configure the appliance to transmit an Elementary

 

Stream Type

stream as a secondary stream. A video ES, or video elementary

 

 

stream, consists of all the video data for a sequence, including the

 

 

sequence header and all the subparts of a sequence. A Transport

 

 

stream contains both video and audio.

 

 

 

Configuration: Encoder > Video

These parameters are used to configure the Encoder video settings. The encoder video and audio configurations change if the appliance has an SDI, Serial Digital Interface. Please refer to SDI Configuration on page 57 for more information.

VBrick MPEG-2 Appliance Admin Guide

25

Image 33
Contents VB4000-5000-6000 Series Network Video Appliances VBrick v4.1 MPEG-2 Appliance Admin GuideCopyright FCC NoticeAbout VBrick Systems MPEG-2 Admin Guide Contents2. MPEG-2 Configuration 1. Introduction4. Status 3. SDI Configuration6. Maintenance 5. Diagnostics7. Maintenance Mode 8. VBStarIndex MPEG-2 Admin Guide OrganizationGetting Help Font Conventions Printer-FriendlyItalics are used to emphasize specific words or phrases Chapter IntroductionOverview VBSSMArchiver and Recorder Functionality Mixed Model AppliancesConfiguration ModelIntroduction Figure 1. Archiver/Recorder Functionality2007 VBrick Systems, Inc MPEG-2 Overview MPEG-2 ConfigurationOptimizing MPEG-2 Performance OptionApplicable Model Absolute Maximum Transport Rates MPEG-2 Configuration RecommendationsDest1, Dest2 DecoderDest1, Dest2 Configuration Network Ethernet Configuration Networkcan be letters, numbers or hyphens Gateway IP AddressConfiguration Network Routing Domain Name ServerNetwork Time Synchronization Routing Method Configuration Network Management Configuration Network IPv6 Configuration BillboardBillboard FTP Using the BillboardBillboard File Types Billboard URLsLocal URL Remote URLVideo Input Creating a BillboardFont Sizes Transparent BackgroundConfiguration Decoder Configuration Decoder Videoapplying this parameter will cause the VBrick to reset Configuration Decoder Audio Configuration Decoder Network Receive Address Configuration Decoder Picture-In-Picture Picture in Picture Configuration Encoder Transport Configuration EncoderConfiguration Encoder Video Video Format \h or \H - Host Name \d or \D - Current Date\t or \T - Current Time Reference Distance Configuration Encoder Audio Audio Input Configuration Encoder Destination 1/Destination2 Destination Address Configuration Encoder Announce SAP support replacement characters. The replacement text is only shown in Announce Common Informationfollowing string IPMask=xxx.xxx.xxx.xxx where SAP for Destination 1 and/orConfiguration Encoder Text Insertion Configuration Recorder Configuration PumpConfiguration FTP File Transfer Configuration ConferencingConferencing Configuration Passthrough COM1 Configuration PassthroughPassthrough State Responder Passthrough State Initiator Destination Configuration System Configuration Passthrough COM2Dedicated Address Mode System Configuration System Generalparameters before you can enable Network Time Synchronization on this windowFront Panel LCD Display Configuration System SNMP TrapsProgram Files\VBrick\VB6000\Download\ReleaseVxxxxxx Event Description NumberEvent Description Improving Security Configuration System SecurityConfiguration System Logging Configuration Video On Demand Configuration Script Management Configuration Script Management Event TriggeringRun Scripts Using IWS Figure 2. Script Management - Part Run Scripts Using the IR Remote Control Run Scripts Using Event TriggersSample Script Scripting Notes Configuration Script Management Auto ConfigurationXML Header Introduction SDI ConfigurationVertical Offset Correction SDI Audio Input 2007 VBrick Systems, Inc Status System Information StatusSystem Model Status Network Status Codec Status Network Statusor 100Mbit GeneralInterface Status Network Status RoutingStatus Decoder Status Status Network Status Network Time Status Network Status IPv6MPEG-2 Decoder Status Decoder State Status Encoder Status MPEG-2 Encoder Status Status Hard Drive StatusStatus Hard Drive Status General Network Status Hard Drive Status PumpStatus Hard Drive Status Recorder Status FTP Server Status Status System Log Status System Log ConfigStatus System Log Traps Status System Log System EventStatus User Information Status System Log System InfoStatus User Information Main Board Status User Information Slot1/Slot2 User Information Version 2007 VBrick Systems, Inc Diagnostics Network Tests DiagnosticsUser Diagnostics Diagnostics Network Tests Ping TestDiagnostics Network Tests Trace Route Test Trace Route Test Results Diagnostics Network Tests Data Test Diagnostics Device Test Diagnostics Decoder Color Bars Diagnostics Hard Drive 2007 VBrick Systems, Inc Maintenance Device Information MaintenanceMaintenance Default All Configuration Maintenance Read/Write ConfigurationMaintenance Read/Write Read From Device Read Configuration Data from Device Maintenance Read/Write Write To Device Maintenance Change Usernames & Passwords Maintenance Usernames & Passwords Change Usernames & PasswordsWrite Configuration Data to Device User Name Default User Name Maintenance Usernames & Passwords Change SNMPv3 PasswordsDefault Password User LevelUser Name Maintenance Mode Maintenance Mode Features Maintenance Mode IndicatorsMaintenance Mode Limitations Command Maintenance Mode CLI OperationEntry ex or exitCommand VBStar Recording vs. Archiving VBStar PumpConfiguration Pump General store files on the C drive. The C drive has limited space and isreserved for VBrick firmware Configuration Pump Destination See MPEG-2 Configuration Encoder Announce SAP on page Configuration Pump Announce SAPConfiguration Pump Operation VBStar Record Using Mixed ModelsFilename Syntax Rules Recording Batch FilesBatch Wrap Point and Record Duration Configuration Recorder General FTP Server Enable Configuration Recorder Network Configuration Recorder Operation Recorder State VBStar FTP File Transfer Configuration FTP File Transfer ServersFTP Server Configuration FTP File Transfer TransfersFTP Status FTP Queue Operation VBStar Status2007 VBrick Systems, Inc Index Page Page Wallingford, Connecticut 06492, USA VBrick Systems, Inc 12 Beaumont Road
Related manuals
Manual 86 pages 2.72 Kb Manual 156 pages 46.18 Kb