VBrick Systems VB6000, VB4000, VB5000 manual Announce Common Information

Page 42
Announce Common Information

Announce Common Information

Program Name

The string providing the name of the stream associated with this

 

SAP. This SAP text shows up in the Program Guide for other

 

VBrick products. Default is \H Program x (where x is 1 or 2, for

 

slot1 or slot2). Note: All of the Common Information fields

 

support replacement characters. The replacement text is only shown in

 

the SAP message at the destination decoder. The fields are replaced by

 

the actual information as explained below.

 

\H or \h – Host Name of VBrick appliance. When the default

 

 

entry is used, the VBrick is identified by the default Host Name

 

 

(set in IWS in the Network: Ethernet section), and will be

 

 

identified as such on the network, see the StreamPlayer software

 

 

example below.

 

\B or \b – If the unit is a VBStar, this is the Base Name of the

 

 

file being pumped by the Hard Drive Pump.

 

\F or \f – If the unit is a VBStar, this is the control name of the

 

 

File being pumped. The control name is a combination which

 

 

consists of 25 characters from the directory name, 25 characters

 

 

from the base name, 3 digits containing the file extension and

 

 

the punctuation (53 total characters maximum). If the directory

 

 

portion is not present, this is the base name of the file being

 

 

pumped.

 

 

Program Author

A string in the SAP that can be used to identify the author. Default

 

is "My Author."

 

 

Program Copyright

A string in the SAP that can be used to identify the copyright

 

information. Default is "My Copyright."

 

 

 

34

© 2007 VBrick Systems, Inc.

Image 42
Contents VBrick v4.1 MPEG-2 Appliance Admin Guide VB4000-5000-6000 Series Network Video AppliancesCopyright FCC NoticeAbout VBrick Systems 2. MPEG-2 Configuration ContentsMPEG-2 Admin Guide 1. Introduction3. SDI Configuration 4. Status7. Maintenance Mode 5. Diagnostics6. Maintenance 8. VBStarIndex MPEG-2 Admin Guide OrganizationGetting Help Font Conventions Printer-FriendlyItalics are used to emphasize specific words or phrases Overview IntroductionChapter VBSSMConfiguration Mixed Model AppliancesArchiver and Recorder Functionality ModelFigure 1. Archiver/Recorder Functionality Introduction2007 VBrick Systems, Inc MPEG-2 Configuration MPEG-2 OverviewOptimizing MPEG-2 Performance OptionApplicable Model Dest1, Dest2 MPEG-2 Configuration RecommendationsAbsolute Maximum Transport Rates DecoderDecoder Configuration Network Configuration Network EthernetGateway IP Address can be letters, numbers or hyphensConfiguration Network Routing Domain Name ServerNetwork Time Synchronization Routing Method Configuration Network Management Configuration Billboard Configuration Network IPv6Using the Billboard Billboard FTPLocal URL Billboard URLsBillboard File Types Remote URLFont Sizes Creating a BillboardVideo Input Transparent BackgroundConfiguration Decoder Configuration Decoder Videoapplying this parameter will cause the VBrick to reset Configuration Decoder Audio Configuration Decoder Network Receive Address Configuration Decoder Picture-In-Picture Picture in Picture Configuration Encoder Configuration Encoder TransportConfiguration Encoder Video Video Format \h or \H - Host Name \d or \D - Current Date\t or \T - Current Time Reference Distance Configuration Encoder Audio Audio Input Configuration Encoder Destination 1/Destination2 Destination Address Configuration Encoder Announce SAP Announce Common Information support replacement characters. The replacement text is only shown inSAP for Destination 1 and/or following string IPMask=xxx.xxx.xxx.xxx whereConfiguration Encoder Text Insertion Configuration FTP File Transfer Configuration PumpConfiguration Recorder Configuration ConferencingConferencing Configuration Passthrough Configuration Passthrough COM1Passthrough State Responder Passthrough State Initiator Destination Configuration System Configuration Passthrough COM2Dedicated Address Mode parameters before you can enable Network Time Synchronization on Configuration System GeneralSystem this windowConfiguration System SNMP Traps Front Panel LCD DisplayProgram Files\VBrick\VB6000\Download\ReleaseVxxxxxx Number Event DescriptionNumber Configuration System Security Improving SecurityConfiguration System Logging Configuration Video On Demand Configuration Script Management Configuration Script Management Event TriggeringRun Scripts Using IWS Figure 2. Script Management - Part Run Scripts Using the IR Remote Control Run Scripts Using Event TriggersSample Script Configuration Script Management Auto Configuration Scripting NotesXML Header SDI Configuration IntroductionVertical Offset Correction SDI Audio Input 2007 VBrick Systems, Inc Status Status System InformationSystem Model Status Network Status Status Network Status CodecGeneral or 100MbitStatus Network Status Routing InterfaceStatus Decoder Status Status Network Status Network Time Status Network Status IPv6MPEG-2 Decoder Status Decoder State Status Encoder Status Status Hard Drive Status MPEG-2 Encoder StatusStatus Hard Drive Status General Status Hard Drive Status Pump NetworkStatus Hard Drive Status Recorder Status System Log Config Status FTP Server Status Status System LogStatus System Log System Event Status System Log TrapsStatus User Information Status System Log System InfoStatus User Information Main Board Status User Information Slot1/Slot2 User Information Version 2007 VBrick Systems, Inc User Diagnostics DiagnosticsDiagnostics Network Tests Diagnostics Network Tests Ping TestDiagnostics Network Tests Trace Route Test Trace Route Test Results Diagnostics Network Tests Data Test Diagnostics Device Test Diagnostics Decoder Color Bars Diagnostics Hard Drive 2007 VBrick Systems, Inc Maintenance Maintenance Device InformationMaintenance Default All Configuration Maintenance Read/Write ConfigurationMaintenance Read/Write Read From Device Read Configuration Data from Device Maintenance Read/Write Write To Device Maintenance Change Usernames & Passwords Maintenance Usernames & Passwords Change Usernames & PasswordsWrite Configuration Data to Device User Name Default Password Maintenance Usernames & Passwords Change SNMPv3 PasswordsDefault User Name User LevelUser Name Maintenance Mode Maintenance Mode Features Maintenance Mode IndicatorsMaintenance Mode Limitations Entry Maintenance Mode CLI OperationCommand ex or exitCommand VBStar VBStar Pump Recording vs. ArchivingConfiguration Pump General store files on the C drive. The C drive has limited space and isreserved for VBrick firmware Configuration Pump Destination Configuration Pump Announce SAP See MPEG-2 Configuration Encoder Announce SAP on pageConfiguration Pump Operation Filename Syntax Rules Using Mixed ModelsVBStar Record Recording Batch FilesBatch Wrap Point and Record Duration Configuration Recorder General FTP Server Enable Configuration Recorder Network Configuration Recorder Operation Recorder State Configuration FTP File Transfer Servers VBStar FTP File TransferConfiguration FTP File Transfer Transfers FTP ServerFTP Status VBStar Status FTP Queue Operation2007 VBrick Systems, Inc Index Page Page VBrick Systems, Inc 12 Beaumont Road Wallingford, Connecticut 06492, USA
Related manuals
Manual 86 pages 2.72 Kb Manual 156 pages 46.18 Kb