Routing Method | This selects which routing method will be used: Changes made to the |
| Routing Method will require a reset of the box. |
•Static – Allows routes entered in the static routing table to be automatically applied to the internal routing tables, after a power- up.
•RIP Version 1 – Configures the VBrick to listen to RIP announcements. Routes are dynamically added per RIP specification.
•RIP Version 2 Broadcast – Configures the VBrick to listen to RIP version 2 announcements. In this mode, RIP will perform classless routing based upon subnet mask.
•RIP Version 2 Multicast – Configures the VBrick to listen to RIP version 2 announcements that are sent in multicast mode. Both broadcast and multicast announcements are processed.
Static Routing | This table provides for user defined routing entries. |
Table | • Destination Network – Enter the destination address to be |
| manually routed. |
•Local Gateway IP – Enter the Gateway to be used, when the forwarding destination address is as specified.
•Network Mask – Sets the network mask to be associated with the destination address.
•Error – This
12 | © 2007 VBrick Systems, Inc. |