VBrick Systems VB4000, VB6000, VB5000 manual Configuration FTP File Transfer Transfers, FTP Server

VBStar

FTP Server 1–8

Name	Ftpserver1 through Ftpserver8.
Type	VBrick or Non-VBrick Appliance.
	• VBrick Appliance – When sending to a VBrick appliance, the
	serving VBrick must select the D: directory. The configuration of
	VBrick Appliance automatically adds D: to the path name or to
	any other configured folder or as part of the Directory entry. If no
	folder is specified, all files will be transferred to the D: directory.
	Additionally, subfolders may be specified.
	• Non-VBrick Appliance – A non-VBrick appliance setting allows a
	destination server to select its own path name, based on account
	user name and password. In this case, the Directory setting may be
	used to specify any sub-folder on the server.
DNS Name/IP	The DNS server name or IP address for the FTP server. It accepts up
	to 20 characters. The Host Name/IP must be a DNS Host Name.
User Name	The FTP server user's account name.
Password	The password required to access the FTP server. Optional entry.
	Accepts up to 20 characters. The FTP User Name and Password must
	be set up properly on the remote FTP server. If they are not entered
	the same as what is set up on the server, the VBrick will be unable to
	connect and perform the transfer.
Account	The account name required to access the FTP server. Optional entry.
Directory	This object allows a manager to switch to a different directory within
	the FTP server after login. Optional entry. Accepts up to 64
	characters. Anonymous FTP is not supported.

Configuration: FTP File Transfer > Transfers

You can separately setup and use eight servers for FTP File Transfer. Enter the server

parameters in the Configuration: FTP File Transfer > Servers screen of IWS.

VBrick MPEG-2 Appliance Admin Guide 113