VBrick Systems VB4000, VB6000, VB5000 manual Status Encoder Status

Page 76

Source IP Address	The IP Address of the video source.

Bytes Transferred	The number of receive bytes transferred.

Buffer Full Count	The number of times the decoder buffer filled to capacity.

Decoder Sync	Indicates whether the MPEG-2 transport layer has achieved its
State	synchronization. Most likely indicates a configuration or network
	problem.

Lost Sync Count	The number of times the decoder has acquired synchronization with
	the transport stream (see note under Unexpected Fragments).

Packets Received	The count of IP packets received.

Non Video Packet	The count of packets directed to this decoder, which are not part of
	the video stream.

Unexpected	The number of mis-ordered packets received. Each appliance
Fragments	maintains a statistical report on Unexpected Fragments received from
	a particular video stream. Note: If multiple devices in the same unit
	(i.e. decoder or hard disk) are tuned to the same stream, the
	Unexpected Fragments count on Slot1 is used exclusively to report
	statistical results.

Packet Ordering	Packet ordering status. Packet ordering is temporarily disabled under
	conditions, such as the IP ID is not increasing or disabled, or the
	access method does not support reordering. Packets arriving over
	Ethernet can be reordered.

Jitter Queue Status	Status of the jitter Q. It is generally equal to the value of the Jitter
	Queue of the decoder with the following exception: if a variable
	transport (video, audio and idle frames included) rate stream is being
	decoded then the jitter queue will be temporarily disabled. The Jitter
	Queue will be re-enabled when the decoder senses that a video stream
	of fixed rate transport is being received.

Audio Micro-code	Revision of the audio microcode on the decoder chip.
Revision

Video Micro-code	Revision of the video microcode on the decoder chip.
Revision

FPGA Revision	Revision of the FPGA chip on the decoder daughter card.

CPLD Revision	Revision level of the CPLD on the decoder daughter card.

PLX EEPROM	Revision level of the PLX EEPROM on the decoder daughter card.
Revision

Status: Encoder Status

This menu allows users to view vital Encoder statistics. As you Refresh you should see

Transmit State – Transmitting and the IP Bytes Transferred count should increment. If this

does not happen check your VBrick's encoder configuration or network.

68	© 2007 VBrick Systems, Inc.

Image 76

Contents VBrick v4.1 MPEG-2 Appliance Admin Guide VB4000-5000-6000 Series Network Video AppliancesFCC Notice CopyrightAbout VBrick Systems Contents MPEG-2 Admin Guide2. MPEG-2 Configuration 1. Introduction3. SDI Configuration 4. Status5. Diagnostics 6. Maintenance7. Maintenance Mode 8. VBStarIndex Organization MPEG-2 Admin GuideGetting Help Printer-Friendly Font ConventionsItalics are used to emphasize specific words or phrases Introduction ChapterOverview VBSSMMixed Model Appliances Archiver and Recorder FunctionalityConfiguration ModelFigure 1. Archiver/Recorder Functionality Introduction2007 VBrick Systems, Inc MPEG-2 Configuration MPEG-2 OverviewOption Optimizing MPEG-2 PerformanceApplicable Model MPEG-2 Configuration Recommendations Absolute Maximum Transport RatesDest1, Dest2 DecoderModel Configuration Network Configuration Network EthernetGateway IP Address can be letters, numbers or hyphensDomain Name Server Configuration Network RoutingNetwork Time Synchronization Routing Method Configuration Network Management Configuration Billboard Configuration Network IPv6Using the Billboard Billboard FTPBillboard URLs Billboard File TypesLocal URL Remote URLCreating a Billboard Video InputFont Sizes Transparent BackgroundConfiguration Decoder Video Configuration Decoderapplying this parameter will cause the VBrick to reset Configuration Decoder Audio Configuration Decoder Network Receive Address Configuration Decoder Picture-In-Picture Picture in Picture Configuration Encoder Configuration Encoder TransportConfiguration Encoder Video Video Format \d or \D - Current Date \h or \H - Host Name\t or \T - Current Time Reference Distance Configuration Encoder Audio Audio Input Configuration Encoder Destination 1/Destination2 Destination Address Configuration Encoder Announce SAP Announce Common Information support replacement characters. The replacement text is only shown inSAP for Destination 1 and/or following string IPMask=xxx.xxx.xxx.xxx whereConfiguration Encoder Text Insertion Configuration Pump Configuration RecorderConfiguration FTP File Transfer Configuration ConferencingConferencing Configuration Passthrough Configuration Passthrough COM1Passthrough State Responder Passthrough State Initiator Destination Configuration Passthrough COM2 Configuration SystemDedicated Address Mode Configuration System General Systemparameters before you can enable Network Time Synchronization on this windowConfiguration System SNMP Traps Front Panel LCD DisplayProgram Files\VBrick\VB6000\Download\ReleaseVxxxxxx Number Event DescriptionNumber Configuration System Security Improving SecurityConfiguration System Logging Configuration Video On Demand Configuration Script Management Event Triggering Configuration Script ManagementRun Scripts Using IWS Figure 2. Script Management - Part Run Scripts Using Event Triggers Run Scripts Using the IR Remote ControlSample Script Configuration Script Management Auto Configuration Scripting NotesXML Header SDI Configuration IntroductionVertical Offset Correction SDI Audio Input 2007 VBrick Systems, Inc Status Status System InformationSystem Model Status Network Status Status Network Status CodecGeneral or 100MbitStatus Network Status Routing InterfaceStatus Network Status Network Time Status Network Status IPv6 Status Decoder StatusMPEG-2 Decoder Status Decoder State Status Encoder Status Status Hard Drive Status MPEG-2 Encoder StatusStatus Hard Drive Status General Status Hard Drive Status Pump NetworkStatus Hard Drive Status Recorder Status System Log Config Status FTP Server Status Status System LogStatus System Log System Event Status System Log TrapsStatus System Log System Info Status User InformationStatus User Information Main Board Status User Information Slot1/Slot2 User Information Version 2007 VBrick Systems, Inc Diagnostics Diagnostics Network TestsUser Diagnostics Diagnostics Network Tests Ping TestDiagnostics Network Tests Trace Route Test Trace Route Test Results Diagnostics Network Tests Data Test Diagnostics Device Test Diagnostics Decoder Color Bars Diagnostics Hard Drive 2007 VBrick Systems, Inc Maintenance Maintenance Device InformationMaintenance Read/Write Configuration Maintenance Default All ConfigurationMaintenance Read/Write Read From Device Read Configuration Data from Device Maintenance Read/Write Write To Device Maintenance Usernames & Passwords Change Usernames & Passwords Maintenance Change Usernames & PasswordsWrite Configuration Data to Device User Name Maintenance Usernames & Passwords Change SNMPv3 Passwords Default User NameDefault Password User LevelUser Name Maintenance Mode Maintenance Mode Indicators Maintenance Mode FeaturesMaintenance Mode Limitations Maintenance Mode CLI Operation CommandEntry ex or exitDescription VBStar VBStar Pump Recording vs. Archivingstore files on the C drive. The C drive has limited space and is Configuration Pump Generalreserved for VBrick firmware Configuration Pump Destination Configuration Pump Announce SAP See MPEG-2 Configuration Encoder Announce SAP on pageConfiguration Pump Operation Using Mixed Models VBStar RecordFilename Syntax Rules Recording Batch FilesBatch Wrap Point and Record Duration Configuration Recorder General FTP Server Enable Configuration Recorder Network Configuration Recorder Operation Recorder State Configuration FTP File Transfer Servers VBStar FTP File TransferConfiguration FTP File Transfer Transfers FTP ServerFTP Status VBStar Status FTP Queue Operation2007 VBrick Systems, Inc Index Page Page VBrick Systems, Inc 12 Beaumont Road Wallingford, Connecticut 06492, USA

Related manuals

Manual 86 pages 2.72 Kb

Manual 156 pages 46.18 Kb