VBrick Systems VB6000, VB4000, VB5000 manual Configuration Decoder Picture-In-Picture

Page 30
Configuration: Decoder > Picture-In-Picture

SAP Timeout

If SAP Timing method is fixed, this provides a configurable timeout

 

for program guide selections, in seconds. If no SAP is received

 

within the timeout period, the entry is removed from the table of

 

available programs. If SAP Timeout is variable, the entries are

 

removed from the program table as per RFC 2974 (Refer to

 

Configuration: System > General).

 

 

SAP Category

This string can contain one or more category keywords that will

 

limit the video streams displayed by the Program and Conference

 

Guides. Keywords should be separated by spaces. Note that

 

characters are ASCII and can only be lowercase. The total of all

 

keywords in the string is 36 characters including spaces. If the

 

Decoder's category string contains both the keywords "Math" and

 

"Science," only video streams whose encoders have one or more of

 

these keywords assigned, or those that contain no keyword, will be

 

available to this Decoder. The Encoder's Category is established on

 

the Configuration: Encoder > SAP menu screen of IWS.

 

Note also the wildcard character * is supported at the very end of

 

keywords only. It is only valid if one or more additional characters

 

of any type follow the last non-wildcard character. Note that * with

 

spaces on both sides will display all streams. Having no category

 

defined (default) displays all streams.

 

 

SAP IP Address

The receive IP address used to populate the Program Guide. This is

 

typically set to the Announce Program Guide SAP of the encoder.

 

 

SAP Port

The receive IP port used to populate the Program Guide. This is

 

typically the port number of the encoder.

 

 

Configuration: Decoder > Picture-In-Picture

This menu allows the user to configure the Picture-In-Picture parameters on the decoder output. The Picture in Picture feature is only available for encoder/decoder VBrick appliances.

22

© 2007 VBrick Systems, Inc.

Image 30
Contents VBrick v4.1 MPEG-2 Appliance Admin Guide VB4000-5000-6000 Series Network Video AppliancesCopyright FCC NoticeAbout VBrick Systems 2. MPEG-2 Configuration ContentsMPEG-2 Admin Guide 1. Introduction3. SDI Configuration 4. Status7. Maintenance Mode 5. Diagnostics6. Maintenance 8. VBStarIndex MPEG-2 Admin Guide OrganizationGetting Help Font Conventions Printer-FriendlyItalics are used to emphasize specific words or phrases Overview IntroductionChapter VBSSMConfiguration Mixed Model AppliancesArchiver and Recorder Functionality ModelFigure 1. Archiver/Recorder Functionality Introduction2007 VBrick Systems, Inc MPEG-2 Configuration MPEG-2 OverviewOptimizing MPEG-2 Performance OptionApplicable Model Dest1, Dest2 MPEG-2 Configuration RecommendationsAbsolute Maximum Transport Rates DecoderDecoder Configuration Network Configuration Network EthernetGateway IP Address can be letters, numbers or hyphensConfiguration Network Routing Domain Name ServerNetwork Time Synchronization Routing Method Configuration Network Management Configuration Billboard Configuration Network IPv6Using the Billboard Billboard FTPLocal URL Billboard URLsBillboard File Types Remote URLFont Sizes Creating a BillboardVideo Input Transparent BackgroundConfiguration Decoder Configuration Decoder Videoapplying this parameter will cause the VBrick to reset Configuration Decoder Audio Configuration Decoder Network Receive Address Configuration Decoder Picture-In-Picture Picture in Picture Configuration Encoder Configuration Encoder TransportConfiguration Encoder Video Video Format \h or \H - Host Name \d or \D - Current Date\t or \T - Current Time Reference Distance Configuration Encoder Audio Audio Input Configuration Encoder Destination 1/Destination2 Destination Address Configuration Encoder Announce SAP Announce Common Information support replacement characters. The replacement text is only shown inSAP for Destination 1 and/or following string IPMask=xxx.xxx.xxx.xxx whereConfiguration Encoder Text Insertion Configuration FTP File Transfer Configuration PumpConfiguration Recorder Configuration ConferencingConferencing Configuration Passthrough Configuration Passthrough COM1Passthrough State Responder Passthrough State Initiator Destination Configuration System Configuration Passthrough COM2Dedicated Address Mode parameters before you can enable Network Time Synchronization on Configuration System GeneralSystem this windowConfiguration System SNMP Traps Front Panel LCD DisplayProgram Files\VBrick\VB6000\Download\ReleaseVxxxxxx Number Event DescriptionNumber Configuration System Security Improving SecurityConfiguration System Logging Configuration Video On Demand Configuration Script Management Configuration Script Management Event TriggeringRun Scripts Using IWS Figure 2. Script Management - Part Run Scripts Using the IR Remote Control Run Scripts Using Event TriggersSample Script Configuration Script Management Auto Configuration Scripting NotesXML Header SDI Configuration IntroductionVertical Offset Correction SDI Audio Input 2007 VBrick Systems, Inc Status Status System InformationSystem Model Status Network Status Status Network Status CodecGeneral or 100MbitStatus Network Status Routing InterfaceStatus Decoder Status Status Network Status Network Time Status Network Status IPv6MPEG-2 Decoder Status Decoder State Status Encoder Status Status Hard Drive Status MPEG-2 Encoder StatusStatus Hard Drive Status General Status Hard Drive Status Pump NetworkStatus Hard Drive Status Recorder Status System Log Config Status FTP Server Status Status System LogStatus System Log System Event Status System Log TrapsStatus User Information Status System Log System InfoStatus User Information Main Board Status User Information Slot1/Slot2 User Information Version 2007 VBrick Systems, Inc User Diagnostics DiagnosticsDiagnostics Network Tests Diagnostics Network Tests Ping TestDiagnostics Network Tests Trace Route Test Trace Route Test Results Diagnostics Network Tests Data Test Diagnostics Device Test Diagnostics Decoder Color Bars Diagnostics Hard Drive 2007 VBrick Systems, Inc Maintenance Maintenance Device InformationMaintenance Default All Configuration Maintenance Read/Write ConfigurationMaintenance Read/Write Read From Device Read Configuration Data from Device Maintenance Read/Write Write To Device Maintenance Change Usernames & Passwords Maintenance Usernames & Passwords Change Usernames & PasswordsWrite Configuration Data to Device User Name Default Password Maintenance Usernames & Passwords Change SNMPv3 PasswordsDefault User Name User LevelUser Name Maintenance Mode Maintenance Mode Features Maintenance Mode IndicatorsMaintenance Mode Limitations Entry Maintenance Mode CLI OperationCommand ex or exitCommand VBStar VBStar Pump Recording vs. ArchivingConfiguration Pump General store files on the C drive. The C drive has limited space and isreserved for VBrick firmware Configuration Pump Destination Configuration Pump Announce SAP See MPEG-2 Configuration Encoder Announce SAP on pageConfiguration Pump Operation Filename Syntax Rules Using Mixed ModelsVBStar Record Recording Batch FilesBatch Wrap Point and Record Duration Configuration Recorder General FTP Server Enable Configuration Recorder Network Configuration Recorder Operation Recorder State Configuration FTP File Transfer Servers VBStar FTP File TransferConfiguration FTP File Transfer Transfers FTP ServerFTP Status VBStar Status FTP Queue Operation2007 VBrick Systems, Inc Index Page Page VBrick Systems, Inc 12 Beaumont Road Wallingford, Connecticut 06492, USA
Related manuals
Manual 86 pages 2.72 Kb Manual 156 pages 46.18 Kb