VBrick Systems VB6000 Configuration Pump, Configuration Recorder, Configuration FTP File Transfer

	MPEG-2 Configuration
User String	36 characters maximum. This is the actual text message that will be
	displayed and refreshed at the interval specified above. You can use
	any combination of alphanumeric and special characters. The
	following standard operators are supported in the text message.
	• \s1 – Blinking on.
	• \s0 – Blinking off.
	• \h – The VBrick Host Name on Configuration: Network page.
	• \t – The time in HH:MM:SS format.
	• \d – The date in MM:DD:YY format.
	Example: \d \s1 Accident on I 95 \s0 \t will display the message
	11:10:05 Accident on I 95 14:55:22 with Accident on I95 blinking.
	To avoid conflicts between fields that refresh automatically (\h, \t,
	\d) and /s1 which controls blinking, be sure to enable blinking at least
	once on every line where blinking is desired.
Vertical Position	1–16. The screen is divided into 16 vertical lines for messages. Line 1
	is at the top; Line 8 is in the middle of the screen.
Horizontal	1–35. Starting position on line. 1 is at the extreme left side of the
Position	screen.
Display Enable	Indicates whether the message is enabled or disabled.
Error	Displays validation and other errors.

Configuration: Pump

See VBStar Pump on page 100.

Configuration: Recorder

See VBStar Record on page 105.

Configuration: FTP File Transfer

See VBStar FTP File Transfer on page 112.

Configuration: Conferencing

Conferencing is a feature that allows a user to set up a two-way video conference using the IR Remote Control. This screen provides the configuration of the necessary parameters.

VBrick MPEG-2 Appliance Admin Guide 37