MP6211
CD CHANGER OPERATION
Please call Jensen technical support at
After the CD changer has been installed and properly connected, press the Reset button (24) to initialize the installation. Refer to the owner’s manual included with the CD changer for instructions on installing, loading and using the CD magazine.
CD Changer Mode
Press MODE (2) during tuner or disc play to select operation of the CD changer. Disc play will begin, and the disc and track numbers will be shown in the display. If a new magazine has been loaded into the changer, play will begin from the first track of the first disc. If a magazine was already in the changer, play will resume where it last ended.
Disc Select
To select the desired disc for play, press UP (17) to advance to a higher disc or DN (16) to move back to a lower disc. The number of the disc in play will appear on the display.
Other Features
During CD changer play, the Pause, Repeat, Random, Intro Scan and Track Select features are accessed using the same methods as for regular disc play. Refer to the CD Player Operation section of this manual for details.
JPORT OPERATION
After the JPORT has been installed and connected, press the RESET button (24) to initialize the installation. The JPORT can be used to control your iPod or an optional CD Changer.
Refer to the owner’s manual included with the JPORT for instructions regarding the operation of external devices attached to your JPORT.
13