Installation
2 Tighten two screws on each side. | Fastening the front panel |
Screw | If you do not plan to detach the front panel, |
| the front panel can be fastened with the sup- |
| plied screw. |
Section
04
English
Mounting bracket | Dashboard or console |
|
! Use either truss (5 mm × 8 mm) or flush | Screw | |
surface (5 mm × 9 mm) screws, depending |
| |
on the bracket screw holes.
Removing the unit
1Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with the groove down.)
Trim ring
!Releasing the front panel allows easier ac- cess to the trim ring.
2Insert the supplied extraction keys into both sides of the unit until they click into place.
3Pull the unit out of the dashboard.
En 
13