Pioneer DEH-1200MP Operating this unit, Tuner, Storing and recalling stations, Function settings

Section

02Operating this unit

Turning the unit off

1Press SRC/OFF and hold until the unit turns off.

Selecting a source

1Press SRC/OFF to cycle between:

TUNER (tuner)—CD (built-in CD player)—AUX (AUX)

Adjusting the volume

1Turn SRC/OFF to adjust volume.

Note

When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.

Storing and recalling stations

You can easily store up to six stations as pre- sets.

%When you find a station that you want to store in memory, press one of the preset tuning buttons (1 to 6) and hold until the preset number stops flashing.

Stored radio station frequency can be recalled

by pressing the preset tuning button.

# Press a or b to recall radio station frequen- cies.

Function settings

%Press F (function) to select the function. After selecting, perform the following proce- dures to set the function.

Menu operations identical for function settings/audio adjustments/initial settings

Returning to the ordinary display

Canceling the initial setting menu

!Press BAND/ESC.

You can also cancel initial settings by holding down SRC/OFF until the unit turns off.

Tuner

Basic Operations

Selecting a band

1Press BAND/ESC until the desired band (F1, F2, F3 for FM or AM) is displayed.

Manual tuning (step by step)

1Press c or d.

Seeking

1Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing c or d.

While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you re- lease c or d.

LOCAL (local seek tuning)

Local seek tuning lets you tune in only those radio sta- tions with sufficiently strong signals for good recep- tion.

1Press a or b to turn local seek tuning on or off.

2Press c or d to set the sensitivity.

FM: LOCAL 1—LOCAL 2—LOCAL 3—LOCAL 4

AM: LOCAL 1—LOCAL 2

Larger setting number is higher level. The highest level setting allows reception of only the strongest stations, while lower settings let you receive pro- gressively weaker stations.

BSM (best stations memory)

BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength.

Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 1 to 6.

1Press a to turn BSM on.

The six strongest broadcast frequencies are stored in the order of their signal strength. To cancel the storage process, press b.

6 En