Jensen VM8013HD operation manual Radio Operation, Radio FM1 P1 87.50 MHz

VM8013HD

RADIO OPERATION

About HD Radio™ Technology

HD Radio technology allows CD-quality digital broadcasting of your local AM and FM radio stations. HD Radio broadcasts can include multiple channels on the same frequency, which is called multicasting. With

6.Current Preset Channels

7.Source Indicator

8.HD Radio Station Indicator

multicasting, you can receive up to eight additional multicast channels: HD1~HD8.

With your VM8013HD radio, you will receive HD Radio digital broadcasts automatically when tuned to a station that offers HD Radio technology.

NOTE: Not all FM or AM stations offer HD Radio (digital) broadcasting. You can receive both analog and digital stations with the VM8013HD.

Accessing Radio Mode

Press the SRC button (6) on the front panel or remote control (14) to switch to the RADIO source.

1 2

DISP CH/

CAT

DIM

SRC PGM

BAND

iPod Menu

VM8013HD

INT

1 2

RPT RDM

3 4

DN UP

5 6

18

A/V IN

1	7	3	2	8	4
	Radio FM1 P1 87.50 MHz				01:02
					AM
	AUTO		HD
	P1		87.50MHz
	P2		90.10MHz
	PS: SO SMALL
	5				6

1.Auto, Analog, Digital Reception Indicator

2.Radio Station Frequency

3.AM/FM Band

4.Time/Clock

5.Program Information: Artist, Title, Type

NOTE: The amount of information displayed when receiving an HD Radio signal is dependent upon what is being broadcast. Some stations broadcast their call letters (name), the artist's name, song title, and category of music.

Selecting the AM/FM Band

Press the BAND button (3) to change between the AM and FM band.

Tuning

Seek Tuning

Press the TUNE/TRACK >> or << buttons (17) to seek the next/previous station automatically.

Manual Tuning

Press and hold the TUNE/TRACK >> or << buttons (17) to enter Manual tuning mode. Press the buttons again to move the radio frequency number up or down one step.

HD Radio Multicast Channels

To tune to an HD Radio multicast channel, tune to the main signal and then press the PGM button (14) on the control panel. A list of multicast channels will be displayed (HD-1, HD-2 etc).

•Use the rotary encoder to navigate the list and then press to select a multicast channel.

•Use the remote control arrow keys and ENTER button to select a multicast channel.

Press and hold the PGM button to change between "Auto", "Digital" and "Analog". When set to “AUTO”, the station will first be received in Analog but will change to Digital when a digital signal is detected and the HD icon

12