Jensen VM8013HD operation manual Satellite Radio Operation, SAT1, CH001

VM8013HD

SATELLITE RADIO OPERATION

Listeners can subscribe to XM® Radio on the Web by visiting www.xmradio.com, or by calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the Identification (ID) Code”). Customers can receive a limited number of free-to-air channels without activation.

Accessing Satellite Radio Mode

Press the SRC button (6) on the front panel or remote control (14) to switch to the SAT source.

7	1	3	2	4
SAT		SAT1	CH001	01:02
				AM
CHAN: XM Preview
P1		XM Preview
P2		XM Preview
Title: www.xmradio.com
5				6

1.SAT Channel Name

2.SAT Channel Number

3.SAT Band

4.Time/Clock

5.Artist and Title Information

6.Current Preset Channels

7.Source Indicator

Displaying the Identification (ID) Code

Before you listen to satellite radio, you must subscribe to the service using your radio’s identification number. To display the radio ID, press the DISP button three times or use the << tuning button (17) to tune to channel “000”. The screen displays the radio ID where the channel name is usually displayed.

Select a Band

Press the BAND button (3) to change between three SAT bands (SAT1, SAT2 and SAT3). Each band stores up to six preset stations.

Selecting a Station

Press the >> or << tuning button (17) to tune to another station.

Preset Mode

Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band can be viewed on the screen. Use the remote control up/down arrow buttons (5) to scroll through the list.

Storing a Station

1.Select a band (if needed), then select a station.

2.Press and hold a preset button (numbers 1-6) on the front panel or remote control.

3.The preset number and station appears highlighted.

Recalling a Station

1.Select a band (if needed).

2.Press a front panel or remote control preset button (numbers 1-6) to select the corresponding stored station.

Channel Search

To access Channel Search mode, press the DISP button (7). The list of all available channels appears on the screen.

1.Rotate the VOL/SEL/MENU rotary encoder (2) on the control panel or press the up/down arrow keys (5) on the remote control to navigate the list of channels.

2.Press the VOL/SEL/MENU button on the control panel or the ENTER button (6) on the remote control to select a channel.

10