24 | 3M™ MicroTouch™ Software MT 7 User Guide |
Draw Test
Note: You must be in Draw mode for this to work properly.
The Draw program lets you test the operation of the sensor and pen by checking the accuracy and speed with which the system responds to your touch. To draw, simply touch the sensor and drag your finger or pen.
The following options will help you use the draw program more effectively:
∙Press B (blank) to clear the screen and display a blank drawing canvas.
∙Press G (grid) to clear the screen and display a grid that you can use as a drawing guide (default setting).
∙Press L (line) to draw solid lines on the screen (default setting).
∙Press D (dots) to draw dotted lines on the screen, where each dot represents a point reported by the sensor.
∙Press the Space Bar to clear the display.
Restore Factory Settings
Software
The Reset Software option is useful if you have reconfigured the MT 7 software and need to get back to a working state. This option will restore supplier factory configuration settings. If none exist, it will reset to 3M Touch System defaults.
Controller
The Restore Controller option is useful if you have reconfigured the controller and need to get back to a working state. Pressing this button restores 3M Touch System
3M Touch Systems, Inc. Proprietary Information – 25695M