3M™ MicroTouch™ Software MT 7 User Guide | 45 |
The Install script assumes that the hotplug support files are in the directory /etc/hotplug/. If hotplug resides elsewhere, change the definition of HotplugDir to the appropriate path.
If you want to disable hot plugging of USB controllers, change both UdevDir and HotplugDir to
XFree86Dir
Refer to the symbol XorgDir for details.
XinitDir and XinitSuffix
The MT 7 for Linux® runs some background tasks need ed for full support of some user interface features. The Install script uses an X init script to launch these tasks.
The Install script automatically places the script
Some distributions require a suffix for these scripts. If needed, change the XinitSuffix value to the needed suffix. For example, if your distribution requires these scripts to have a .sh, change the XinitSuffix symbol to be .sh.
XorgConf
This symbol contains that path for xorg.conf file, normally /etc/X11/xorg.conf. MT 7 for Linux® must modify this file to register i ts drivers. If you use a different file, change the value of this symbol. If you do not use a configuration file, refer to 'Cannot find /etc/X11/xorg.conf' in the section 'Error Messages During Installation'.
XorgDir and XFree86Dir
The MT 7 for Linux® software uses an X input module to get touch data into the X Windows server. The Install script inspects the paths /usr/lib/xorg/modules/input and /usr/X11R6/lib/modules/input. If your X input modules reside elsewhere, change the appropriate variable to the correct path.
Error Messages During Installation
This covers error messages generated by the Install script. Programs used by the script may generate their own messages. This section does not cover those messages.
Note: Not all will be the same depending on which version you are running
3M Touch Systems, Inc. Proprietary Information – 25695M