30 | 3M™ MicroTouch™ Software MT 7 User Guide |
Adjust the frequency until your touch test produces acceptable results. A good test is to go to the Draw program and hold your finger steady on the sensor. If the resulting pattern is a crisp and clear single dot, you should have a good frequency.
It is recommended that you recalibrate the touch sensor after you run the Sensor Frequency option.
Controller ID
Note: Changing this field will affect your multiple display setup.
From the Tools tab, you can choose the Advanced Options button. From the Advanced Options dialog, select Enable Controller Identifier Selection to activate this option on the controller tab.
If you do not have a multiple display setup, you do not need to use this field. Please refer to the Multiple Display section for more information.
3M Touch Systems, Inc. Proprietary Information – 25695M