40 | 3M™ MicroTouch™ Software MT 7 User Guide |
Use this Browser to select the MT 7 components for your target image. The only required component is the MT 7 Touch driver. In the Component Browser, look under "Hardware:Devices:Mice and other pointing devices". Select the 3M Touch Systems MT7 Touch driver.
Whether you are using a serial or USB controller, the MT7 touch driver requires USB support. You must include the XPe USB support component in your target device.
MT 7 Components
MT7 has several additional components, found in the Component Browser under "Software:Application:OEM,” that you may select acc ording to the needs of your target system.
The "MT7 Control Panel" component allows the end user to calibrate their sensor, configure, and modify some touch behavior.
The "MT7 Calibration Tool" component allows the user to calibrate their sensor.
Note that you must select one or more of the following controller support components to enable the previous tools.
3M Touch Systems, Inc. Proprietary Information – 25695M