CD mode
Gently close the control panel whilst exerting a little pressure until you feel it click into place.
The CD playback starts and "CD" is shown on the display.
Note:
If the vehicle ignition was switched off prior to inserting the CD, you must switch the device on first with the On/ Off button 3to start the playback.
If a CD is already inserted in the drive,
press the SOURCE button 4 repeat- edly until "CD" appears on the display.
Playback begins from the point at which it was last interrupted.
Selecting tracks
Press an arrow button >or @to se- lect the next or previous track.
If you press the 
>or 
button @once, the player will play the current track again from the beginning.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down the >or @ar- row button until fast searching back- wards or forwards begins.
Random track play (MIX)
Press the softkey "MIX" 6.
"MIX ALL" briefly appears on the display, info line 2 H permanently displays "Mix All". The next randomly selected track will then be played.
Cancelling MIX
Press the softkey "MIX" 6again.
"MIX OFF" briefly appears on the display, info line 2 Hno longer displays "Mix All".
Scanning tracks (Scan)
You can scan (briefly play) all the tracks on the CD.
Press the OK button Bfor longer than 2 seconds.
The next track will then be scanned. "SCAN" and the current track number are intermit- tently shown on the display.
Note:
You can set the scan time. For further information, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter.
Cancelling Scan and continuing listening to a track
To end the scanning process,
press the OK button B.
The currently scanned track will then con- tinue to be played normally.
Repeating tracks (RPT)
If you want to repeat a track,
press the softkey "RPT" 7.
"REPEAT TRACK" briefly appears on the display, info line 2 Hpermanently displays "Rpt Trk". The track is repeated continuous- ly until you deactivate Repeat.
78