Alpine DVA-9861Ri owner manual Switching the Audio Tracks, Switching the Angle, 23-EN

Switching the Audio Tracks

For discs with multiple audio or audio languages, you can switch the audio language temporarily during playback.

•This operation is performed by the remote control unit.

During playback, press AUDIO.

The sound switches between the alternate audio tracks recorded on the disc each time the button is pressed.

•The selected audio track becomes the default setting every time the power is turned on or the disc is replaced. If a disc does not include the language you selected for the default audio track, the disc’s default language is selected instead. Refer to “Setting the language” (page 31).

•Not all discs will allow changing the alternate audio tracks during playback. In these cases, select audio tracks from the DVDs menu.

•There may be a delay before the selected alternate track begins to play.

DVD-VR/Video CDs with multiplex audio

DVD-VR

During playback, press and hold AUDIO for at least 2 seconds.

The left and right channels will be output as shown below, each time the button is pressed.

LR LL RR LR

Video CD

During playback, press AUDIO.

The left and right channels will be output as shown below, each time the button is pressed.

LR LL RR LR

Switching the Angle

On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.

•This operation is performed by the remote control unit.

During playback, press ANGLE.

The angle switches between the angles recorded on the disc each time the button is pressed.

•Some time may be required for the angle to change.

•Depending on the disc, the angle may switch in one of two ways.

-Seamless: The angle switches smoothly.

-Non-seamless: When the angle is switched, a still picture is displayed first, after which the angle switches.

•If the DVD-Audio disc is set to “VCAP”, operation can be performed. (Refer to “Setting the DVD Audio Playback Mode” on page 35.)

Switching the Subtitles (subtitle language)

With multiple subtitle language DVDs, the subtitle language can be switched during playback, or subtitles can be hidden.

•This operation is performed by the remote control unit.

During playback, press SUBTITLE.

The subtitle switches between the languages recorded on the disc and OFF each time the button is pressed.

During DVD-VR playback, the display of the subtitle is set to ON or OFF.

•There may be a delay before the selected subtitle appears.

•Not all discs will allow changing the subtitles during playback. In these cases, select subtitles from the DVD’s menu.

•The selected subtitle language becomes the default setting every time the power is turned on or the disc is replaced. If a disc does not include that language, the disc’s default language is selected instead. Refer to “Setting the language” (page 31).

•For some discs, the subtitles will be displayed even when this is set to off.

•If the DVD-Audio disc is set to “VCAP”, operation can be performed. (Refer to “Setting the DVD Audio Playback Mode” on page 35.)

Tips

Switching from the disc menu.

For some discs, the audio language, angle and subtitles can be switched from the disc menu.

DVD Video

1.Press MENU, select the item, then press ENT.

2.Press , , or to select the language or angle, then press ENT.

(For some discs, they can be selected using the numeric keypad “0” to “9” while the language or the angle menu is displayed.)

DVD Audio

1.Press and hold DISP./TOP M., select the item, then press ENT.

2.Press , , or to select the language or angle, then press ENT.

(For some discs, they can be selected using the numeric keypad “0” to “9” while the language or the angle menu is displayed.)

•If the DVD-Audio disc is set to “VCAP”, operation can be performed. (Refer to “Setting the DVD Audio Playback Mode” on page 35.)

23-EN