Vehicle Display Interface Connector
Outputs Vehicle Display Interface control signals. Connect this to the optional Vehicle Display Interface box.
For details about connections, consult your nearest Alpine dealer.
Ai-NET Connector
Connect this to the output or input connector of other product (CD changer, Equalizer, etc.) equipped with
Ai-NET Cable (Included with CD Changer)
iPod Direct Connector
Control iPod signals.
Connect this to an iPod, using the FULL SPEED™ Connection Cable (included).
FULL SPEED™ Connection Cable (included)
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control output lead.
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panel- compatible monitor.
Video Output Connector
This connector is used in combination with the video inputs of another video product. (Touch panel compatible monitor, etc.)
Antenna Receptacle
ISO/JASO Antenna Adapter (sold separately)
ISO/JASO Antenna Adaptor may be required, depending on the vehicle.
Audio Interrupt In Lead (Pink/Black)
Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is received.
Remote
Connect this lead to the remote
Dimmer Lead (Orange)
This lead may be connected to the vehicle’s instrument cluster illumination lead. This will enable the vehicle’s dimmer control to dim the backlighting of the unit.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna, if applicable.
•This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s battery.
ISO Power Supply Connector
ISO Connector (Speaker Output)
66-EN
Left Rear (+) Speaker Output Lead (Green)
Left Rear
Left Front
Right Rear
Use when combining optical digital input compatible products.
Steering Remote Control Interface Connector
To steering remote control interface box.
•Use a steering remote control extension cable if necessary.
Rear Output RCA Connectors
RED is right and WHITE is left.
Front Output RCA Connectors
RED is right and WHITE is left.
Subwoofer Output RCA Connectors
RED is right and WHITE is left.
System Switch
When connecting a processor using
•Be sure to turn the power off to the unit before changing the switch position.
Power Supply Connector
RCA Extension Cable (sold separately)
Fuse Holder (10A)