Alpine DVA-9861Ri Setting the Treble Control, Turning Loudness On/Off, Setting the Bass Level

Page 27

Setting the Bass Level

3-3*Turn the Rotary encoder to select the desired bass level (–7~+10).

You can emphasize or weaken the bass level.

4 Press MENU to select RETURN.

After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

•If no operation is performed within 60 seconds, the bass control setting will be turned off automatically.

•The bass level settings will be individually memorized for each source (FM, MW (LW), CD, etc.) until the setting is changed. The bass frequency and bass band width settings adjusted for one source are effective for all other sources (FM, MW (LW), CD etc.).

•Depending on the connected devices, some functions and display indications do not work. However, Bass Level is still adjustable if an audio processor with the Bass function is connected.

•This function is inoperable when DEFEAT is set to ON.

•While in the bass adjusting mode, TREBLE CONTROL adjusting

mode can be recalled by pressing or .

*The adjustment can also be made by pressing MODE. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 25).

Bass level indicator’s display

Bass level is usually displayed.

Setting the Treble Control

You can change the Treble Frequency emphasis to create your own tonal preference.

1 Press MENU to select the BASS ENGINE mode, then press MODE.

BASS ENGINE SETUP RETURN (OFF) BASS ENGINE

2 Press or to select the TREBLE (treble Center frequency) control mode.

BASS TREBLE

Setting the Treble Centre Frequency

3-1 Press SOURCE/POWER to select the desired treble Centre frequency.

10.0kHz 12.5kHz 15.0kHz 7.5kHz 10.0kHz

Emphasizes the displayed Treble frequency ranges.

Setting the Treble Level

3-2*Turn the Rotary encoder to select the desired treble level (–7~+7).

You can emphasize the treble level.

4 Press MENU to select RETURN.

After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

•If no operation is performed within 60 seconds, the treble control setting will be turned off automatically.

•The treble level settings will be individually memorized for each source (FM, MW (LW), CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, MW (LW), CD, etc.).

•Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if an audio processor with the Treble function is connected.

•This function is inoperable when DEFEAT is set to ON.

•While in the treble adjusting mode, BASS CONTROL adjusting mode

can be recalled by pressing or .

*The adjustment can also be made by pressing MODE. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 25).

Turning Loudness On/Off

Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound.

Press and hold the MODE for at least 2 seconds to activate or deactivate the loudness mode.

“LD” indicator lights.

26-EN

Page 26 Page 28
Image 27
Page 26 Page 28
Contents DVA-9861Ri Contents Operating Instructions Setup Installation Connections Operating Instructions Never Attempt the Following Two-layer DVD disc compatible Mark logo Recorded Content Disc sizeMusic CD CD singleOn handling compact discs CD/CD-R/CD-RW Grasp the front panel firmly, slide to the left Turning Power On and OffPress SOURCE/POWER to turn on the unit Getting StartedInitial System Start-Up Adjusting VolumeSetting Time RadioFrequency Search Function Manual Storing of Station PresetsAutomatic Memory of Station Presets Tuning to Preset Stations11-EN Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations Receiving RDS Regional Local StationsReceiving Traffic Information PI Seek SettingSetting PTY31 Emergency Broadcast reception Setting the Time to automatically Adjust13-EN PTY Programme Type TuningReceiving Traffic Information While Playing CD or Radio Priority NewsDisplaying Radio Text Playback14-EN MP3/WMA Play Display Repeat Play15-EN To pause playback, pressMain Unit Operation X. Random PlaySearching from CD Text File/Folder Name Search Concerning MP3/WMAPress or to select a folder name, then press Remote Control OperationAbout MP3/WMA 17-ENDVD/Video CD Terminology18-EN If a menu screen appears Playing a DiscSearching by Programme Searching by Playlist20-EN Stopping Playback PRE-STOPStopping Playback Fast-forwarding/Fast-reversingSearching by Title Number Playing Still Frames pausingSelecting Programme/Playlist Slow Motion Playback22-EN Repeat Playback23-EN Switching the Audio TracksSwitching the Angle DVD-VR/Video CDs with multiplex audioDisplaying the Disc Status Scroll to Move the Page Forward or Back24-EN Setting the Bass Bandwidth Sound SettingSetting the Bass Control Setting the Bass Centre FrequencySetting the Treble Level Setting the Treble ControlSetting the Bass Level Setting the Treble Centre FrequencyOther Functions Displaying the Text27-EN 28-EN Blackout Mode On and OffSetting the Wallpaper Displaying Time29-EN Sound CustomizingVisual Customizing External DeviceDVD Setup DVD Setup Operation30-EN 31-EN Setting the languageSetting the TV Screen Setting the Country CodeSetting the Rating Level Parental Lock Setting item Parental Further setting item Parental Level32-EN 33-EN Audio SetupAudio Setup Operation Press or to change the setting, then press ENTSetting the Downmix Mode 34-ENAudio output/Optical digital audio output Custom Setup Custom Setup Operation35-EN Adjustment Procedure for Dolby Surround External Audio Processor Optional36-EN 37-EN Setting the SpeakersSet MX Mode of the External Audio Processor Over Adjustment38-EN Performing Time Correction Manually TCR/ Phase SwitchingCalculating the Time Correction Inputting the Time CorrectionWhen L/R is selected Graphic Equalizer AdjustmentsSwitching the Phase When L+R is selectedPress Band to select the band Parametric Equalizer AdjustmentsSetting Bass Compressor 40-ENAdjusting the speaker levels Setting Bass FocusSpeaker Setup Setting of Dolby Digital42-EN Adjusting the acoustic imagePress Mode to select the speaker to be adjusted Mixing bass sound to the rear channelAdjust the level Level by turning Rotary encoder Adjusting the DVD LevelUsing the Pro Logic II Mode Achieving powerful high volume soundConfirming the current Preset No./EQ mode Linear PCM SettingStoring Settings in the Memory Recalling the Preset Memory45-EN Remote Control OperationSearching by artist name IPod OptionalSearching for a desired Song Searching by Playlist47-EN Direct Search FunctionSearching by album name Searching by song name48-EN Select Playlist/Artist/AlbumQuick Search Random Play Shuffle M.I.XMulti-Changer Selection Optional Changer OptionalControlling CD Changer Optional Playing MP3 Files with the CD Changer OptionalRemote Control Controls on Remote Control50-EN When Using the Remote Control Battery Replacement51-EN Information About DVDs52-EN Linear PCM audio Lpcm TerminologyDolby Digital Dolby Pro LogicList of Language Codes 54-ENFor details, see 55-EN List of Country CodesCodesTJend 56-ENCD/MP3/WMA/DVD/Video CD Case of DifficultyBasic RadioAudio Indication for CD Player58-EN 59-EN Indication for DVD/Video CD Player60-EN Indication for Changer Indication for iPod Mode61-EN Specifications62-EN Installation and ConnectionsSet InstallationAccessory List 63-ENRemoval 64-EN65-EN Connections66-EN To prevent external noise from entering the audio system Please observe the following when using Fiber Optic CableSystem Example 67-ENDVA-9861Ri Einstelloption DVD-A Play Mode Einstellungen VIDEO/VCAP/VOFF68-05946Z70-A Y Per l’uso./ Se följande tillägg till användarhandledningEspañol Español CHM-S630 CHA-S634 CHA-1214 Alpine CD Changers Give You MorePage
Top Page Image Contents