Alpine DVA-9861Ri owner manual Terminology, Dolby Digital, Dolby Pro Logic, Linear PCM audio Lpcm

Page 54

Terminology

Dolby Digital

Dolby Digital is a digital audio compression technology developed by Dolby Laboratories that allows large quantities of audio data to be efficiently recorded on discs. It is compatible with audio signals from mono (1 channel) all the way up to 5.1-channel surround sound. The signals for the different channels are completely independent, and since the sound is high quality digital there is no loss of sound quality.

*The separately sold digital audio processor (PXA-H900, PXA-H701, etc.) is required to enjoy full 5.1-channel surround sound.

The DVA-9861Ri performs Dolby Digital decoding when it outputs analog audio signals; 2-channel audio, not 5.1-channel.

Center speaker

Front speakers

Rear speakers

Subwoofer

Speaker layout for enjoying

Dolby Digital sound/DTS sound

DTS

This is a home-use digital sound format of the DTS Sound System. This is a high quality sound system, developed by Digital Theater Systems, Inc. for use in movie theatres.

DTS has six independent sound tracks. The theatre presentation is fully realized in the home, etc. DTS is the abbreviation for Digital Theater System.

*To enjoy DTS surround sound you need the separately sold DTS digital audio processor (PXA-H900, PXA-H701, etc.). The DVD video software must also have a DTS sound track.

The DVA-9861Ri has a built-in DTS 2-channel audio decoder. Analog audio outputs are available.

Dolby Pro Logic

Dolby Pro Logic is the technology used to decode programs encoded in Dolby Surround. Pro logic decoding will provide you with four channels of sound (front left/right, centre and monaural rear surround) from a 2-channel (stereo) source.

*The separately sold digital audio processor (PXA-H900) is required to enjoy Dolby Pro Logic surround sound.

Dolby Pro Logic II

Dolby Pro Logic II plays 2-channel sources in 5 channels over the entire frequency range.

This is done with an advanced, high sound quality matrix surround decoder which draws out the spatial properties of the original recording without adding any sounds to or changing the sound of the source.

*The separately sold digital audio processor (PXA-H701, etc.) is required to enjoy Dolby Pro Logic II surround sound.

Linear PCM audio (LPCM)

LPCM is a signal recording format used for music CDs. Whereas music CDs are recorded at 44.1 kHz/16 bits, DVDs are recorded at 48 kHz/16 bits to 96 kHz/24 bits, thereby achieving higher sound quality than music CDs.

Rating levels (parental lock)

This is a DVD function for restricting the viewing age as stipulated by censorship laws in different countries. The way in which viewing is restricted differs from DVD to DVD. Sometimes the DVD cannot be played at all, other times certain scenes are skipped, and other times certain scenes are replaced with other scenes.

53-EN

Image 54
Contents DVA-9861Ri Contents Operating Instructions Setup Installation Connections Operating Instructions Never Attempt the Following CD single Mark logo Recorded Content Disc sizeMusic CD Two-layer DVD disc compatibleOn handling compact discs CD/CD-R/CD-RW Getting Started Turning Power On and OffPress SOURCE/POWER to turn on the unit Grasp the front panel firmly, slide to the leftRadio Adjusting VolumeSetting Time Initial System Start-UpTuning to Preset Stations Manual Storing of Station PresetsAutomatic Memory of Station Presets Frequency Search FunctionReceiving RDS Regional Local Stations Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations 11-ENSetting the Time to automatically Adjust PI Seek SettingSetting PTY31 Emergency Broadcast reception Receiving Traffic InformationPriority News PTY Programme Type TuningReceiving Traffic Information While Playing CD or Radio 13-ENDisplaying Radio Text Playback14-EN To pause playback, press Repeat Play15-EN MP3/WMA Play DisplayFile/Folder Name Search Concerning MP3/WMA X. Random PlaySearching from CD Text Main Unit Operation17-EN Remote Control OperationAbout MP3/WMA Press or to select a folder name, then pressDVD/Video CD Terminology18-EN Searching by Playlist Playing a DiscSearching by Programme If a menu screen appearsFast-forwarding/Fast-reversing Stopping Playback PRE-STOPStopping Playback 20-ENSlow Motion Playback Playing Still Frames pausingSelecting Programme/Playlist Searching by Title NumberRepeat Playback 22-ENDVD-VR/Video CDs with multiplex audio Switching the Audio TracksSwitching the Angle 23-ENDisplaying the Disc Status Scroll to Move the Page Forward or Back24-EN Setting the Bass Centre Frequency Sound SettingSetting the Bass Control Setting the Bass BandwidthSetting the Treble Centre Frequency Setting the Treble ControlSetting the Bass Level Setting the Treble LevelOther Functions Displaying the Text27-EN Displaying Time Blackout Mode On and OffSetting the Wallpaper 28-ENExternal Device Sound CustomizingVisual Customizing 29-ENDVD Setup DVD Setup Operation30-EN Setting the Country Code Setting the languageSetting the TV Screen 31-ENSetting the Rating Level Parental Lock Setting item Parental Further setting item Parental Level32-EN Press or to change the setting, then press ENT Audio SetupAudio Setup Operation 33-ENSetting the Downmix Mode 34-ENAudio output/Optical digital audio output Custom Setup Custom Setup Operation35-EN Adjustment Procedure for Dolby Surround External Audio Processor Optional36-EN Over Adjustment Setting the SpeakersSet MX Mode of the External Audio Processor 37-ENInputting the Time Correction Performing Time Correction Manually TCR/ Phase SwitchingCalculating the Time Correction 38-ENWhen L+R is selected Graphic Equalizer AdjustmentsSwitching the Phase When L/R is selected40-EN Parametric Equalizer AdjustmentsSetting Bass Compressor Press Band to select the bandSetting of Dolby Digital Setting Bass FocusSpeaker Setup Adjusting the speaker levelsMixing bass sound to the rear channel Adjusting the acoustic imagePress Mode to select the speaker to be adjusted 42-ENAchieving powerful high volume sound Adjusting the DVD LevelUsing the Pro Logic II Mode Adjust the level Level by turning Rotary encoderRecalling the Preset Memory Linear PCM SettingStoring Settings in the Memory Confirming the current Preset No./EQ modeRemote Control Operation 45-ENSearching by Playlist IPod OptionalSearching for a desired Song Searching by artist nameSearching by song name Direct Search FunctionSearching by album name 47-ENRandom Play Shuffle M.I.X Select Playlist/Artist/AlbumQuick Search 48-ENPlaying MP3 Files with the CD Changer Optional Changer OptionalControlling CD Changer Optional Multi-Changer Selection OptionalRemote Control Controls on Remote Control50-EN When Using the Remote Control Battery Replacement51-EN Information About DVDs52-EN Dolby Pro Logic TerminologyDolby Digital Linear PCM audio LpcmList of Language Codes 54-ENFor details, see List of Country Codes 55-EN56-EN CodesTJendRadio Case of DifficultyBasic CD/MP3/WMA/DVD/Video CDAudio Indication for CD Player58-EN Indication for DVD/Video CD Player 59-ENIndication for Changer Indication for iPod Mode 60-ENSpecifications 61-ENInstallation and Connections 62-EN63-EN InstallationAccessory List Set64-EN RemovalConnections 65-EN66-EN 67-EN Please observe the following when using Fiber Optic CableSystem Example To prevent external noise from entering the audio systemEinstelloption DVD-A Play Mode Einstellungen VIDEO/VCAP/VOFF DVA-9861RiPer l’uso./ Se följande tillägg till användarhandledning 68-05946Z70-A YEspañol Español Alpine CD Changers Give You More CHM-S630 CHA-S634 CHA-1214Page