Alpine DVA-9861Ri Controlling CD Changer Optional, Multi-Changer Selection Optional, 49-EN

Changer (Optional)

Rotary SOURCE/ encoder POWER BAND

/	FUNC.	Select buttons
		(1 through 6)

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to this unit if it is Ai-NET compatible. With a CD Changer connected to the Ai- NET input of this unit, the CD Changer will be controllable from this unit.

Using the KCA-400C (Multi-Changer Switching device) or the KCA- 410C (Versatile Link Terminal) multiple changers can be controlled by this unit.

See “Multi-Changer Selection” on page 49 for selecting the CD Changers.

•The controls on this unit for CD Changer operation are operative only when a CD Changer is connected.

•The DVD changer (optional) is controllable from this unit as well as the CD changer.

1 Press SOURCE/POWER to activate the CHANGER mode.

The display shows the disc number and track number.

•The source indicator varies depending on the connected source.

•Press BAND to switch the Disc mode in the Changer mode.

2 Press the disc select buttons (1 through 6)

corresponding to one of the discs loaded in the CD Changer.

The selected disc number appears in the display and CD playback starts.

•After selecting the desired disc, you can operate in the same way as for the CD player of this unit.

For details, please see the CD/MP3/WMA section.

•If the “FUNC” indicator is illuminated, the disc select buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the procedure is the same as for the 6-disc CD Changer. To select discs numbered from 7 to 12, first press FUNC. to choose the disc select mode (7 to 12). This changes the “D” indicator to “d”. Then press the desired select button. The select buttons 1 to 6 will represent discs 7 to 12 respectively.

Quick Search

You can search for tracks (files).

1 Press and hold for at least 2 seconds in the Changer mode to activate Quick Search mode.

2 Turn the Rotary encoder within 10 seconds to select a desired track (file).

The selected track is played back immediately.

•Quick Search mode is canceled by pressing and holding for at least 2 seconds.

Playing MP3 Files with the CD Changer (Optional)

If you connect a changer compatible with MP3, you can play CD- ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.

1 Press SOURCE/POWER to switch to the MP3 Changer mode.

2 Press any one of the disc select buttons(1 through 6) corresponding to one of the discs loaded in the CD Changer.

3 To pause playback, press / .

Pressing / again will resume playback.

•The unit can play discs containing both audio data and MP3 data.

•For operating MP3 with an MP3 compatible CD Changer, refer to “CD/MP3/WMA” pages 14 to 18.

Multi-Changer Selection (Optional)

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX).

1 Press SOURCE/POWER on this unit to activate the CD Changer mode.

2 Press BAND to activate the CD Changer Selection mode.

The CD Changer Selection mode remains active for several seconds.

3 Press BAND until the desired CD Changer indicator appears on the display.

•If the selected CD Changer is not connected, the display will show “NO CHGR-No.”

•To operate the selected changer, see “CD/MP3/WMA” (page 14-18).

•For further details about the external input (AUX) when using KCA- 410C, see “Setting the AUX Mode (V-Link)” on page 29.

49-EN