Sony XR-6600RDS operating instructions Presetting the RDS Stations with the AF and TA Data

Page 11

Presetting the RDS Stations with the AF and TA Data

When you preset the RDS stations, the unit stores each station’s data as well as its frequency, so you don’t have to turn on the AF or TA function every time you turn in the preset station. You can select different setting (AF, TA, or both) for individual preset station or the same setting for all preset stations.

Presetting the Same Setting for all Preset Stations

1 Select an FM band.

2 Press the

AF/TA

button repeatedly and

select either “AF ON”, “TA ON” or “AF/TA ON” (for both AF and TA functions).

Note that selecting “AF/TA OFF” stores not only RDS stations, but also non-RDS FM stations.

3 Press the BTMB button for more than two seconds.

Presetting different settings for each preset station

1 Select an FM band and tune in the desired station.

2 Press the

AF/TA

button repeatedly and

select either “AF ON”, “TA ON” or “AF/TA ON” (for both AF and TA functions).

3 Press the desired preset number button for two seconds until a beep sounds. Repeat from step 1 for presetting other stations.

Tip

If you want to change the preset AF and/or TA setting after you tuned in the preset station, you can do so by turning on/off the AF or TA function.

Locating a Station by Programme Type

You can locate the station you want by selecting one of the programme types shown below.

Note

If the countries or regions where EON data is not transmitted, you can use this function only for the stations you have tuned in once.

Programme types

 

Display

 

 

News

 

NEWS

 

Current Affairs

 

AFFAIRS

 

Information

 

INFO

 

Sport

 

SPORT

 

Education

 

EDUCATE

 

Drama

 

DRAMA

 

Culture

 

CULTURE

 

Science

 

SCIENCE

 

Varied

 

VARIED

 

Popular Music

 

POP M

 

Rock

 

ROCK M

 

Middle of the Road

 

M.O.R. M

 

Music

 

 

 

 

Light Classical

 

LIGHT M

 

 

EN

Classics

 

CLASSICS

RDS

Other Music Types

 

OTHER M

Not specified

 

NONE

Functions

 

 

 

 

 

 

 

Note

You cannot use this function in some countries where no

PTY (Programme Type selection) data is available.

1 Press the PTY button during FM reception until “PTY” lights up in the display.

￿

INFO

The current programme type name appears if the station is transmitting the PTY data. “- - - - -” appears if the received station is not an RDS station or if the RDS data has not been received.

2 Press the PTY button repeatedly until the desired programme type appears.

The programme types appear in the order as shown in the above table. Note that you cannot select “NONE” (Not specified) for searching.

￿

SPORT

continue to next page n

11

Actual total number:

Sony XR-6600RDS (E,F,G,I) 3-856-008-11(1)

 

 

Image 11
Contents Actual total number FM/MW/LWCassette player section FeaturesOptional the rotary commander can be used GeneralTable of Contents Detaching and Attaching the Front Panel PrecautionsEjecting the Cassette Setting the ClockCassette Player Operation Listening to Tape PlaybackLocating the Beginnings of the Tracks Fast-winding the TapePlaying Tracks Repeatedly Searching the DesiredIf FM Stereo Reception is Tuning in by Adjusting the FrequencyRadio Reception Searching for the Stations AutomaticallyReceiving the Memorized Stations Memorizing Only Desired StationsDisplaying the Station Name Re-tuning the Same Programme AutomaticallyRDS Functions Overview of the RDS FunctionListening to Traffic Announcements Presetting different settings for each preset station Presetting the RDS Stations with the AF and TA DataPresetting the Same Setting for all Preset Stations Other Functions Using RDS Data for Setting the Clock AutomaticallyAdjusting the Sound Characteristics Enjoying Bass and Treble even at Low VolumeMuting the Beep Tone MaintenanceFuse Replacement Cleaning the ConnectorsDismounting the Unit Rotary Commander LabelsLoud loudness button !ª Location of ControlsMW/LW SpecificationsPower amplifier section RDS functions Troubleshooting GuideTape playback Radio receptionSection lecteur de cassette Satellite de commande en optionCaractéristiques GénéralitésFonctionnement du lecteur de Cassette Table des matièresRetrait et pose de la façade PrécautionsAvertisseur Réglage de l’horlogeRecherche des débuts de plage Ecoute d’une cassetteEjection de la cassette Bobinage rapide de la bandeRépétition Réception radioAccord par réglage de la fréquence Si la réception FM stéréo n’est pas bonneMémorisation de stations particulières Réception des stations mémorisées présélectionsSélectionnez une station FM Fonctions RDSAperçu de la fonction RDS Affichage du nom de la stationFonction de liaison locale Royaume-Uni uniquement Resyntonisation automatique de la même émissionEcoute d’une émission régionale Pour désactiver le radioguidage en cours Présélection du volume pour les messages de radioguidageEcoute des messages de radioguidage Présélection des stations RDS avec les données AF Et TAAppuyez sur l’un ou l’autre côté de la touche SEEK/AMS Localisation d’une station en fonction du type d’émissionTypes d’émission Affichage Fonction sourdine Autres fonctionsRéglage du son Coupure rapide du sonNettoyage des connecteurs Remplacement du fusibleCoupure des bips sonores EntretienRetrait de l’autoradio Etiquettes du satellite de commandeRepeat Nomenclature des touchesIntro PO/GO SpécificationsSection amplificateur de puissance Functions RDS Guide de dépannageLecture de cassette Réception radioTuner EigenschaftenAllgemeines KassettendeckBedienung des Kassettendecks InhaltAbnehmen und Anbringen der Frontplatte SicherheitsmaßnahmenWarnton Einstellen der UhrVorwärts- oder Zurückspulen einer Kassette Bedienung des KassettendecksWiedergeben einer Kassette Auswerfen einer KassetteAutomatisches Suchen nach einer Sendestation RadioempfangWiederholtes Wiedergeben des gleichen Speichern der gewünschten Sendestationen Bei schlechtem UKWEinstellen einer Sendestation durch Einstellen der Frequenz Automatisches Speichern von SendestationenEmpfangen der gespeicherten Sendestationen RDS-FunktionenÜberblick über die RDS- Funktionen Anzeigen des SendernamensLocal-Link-Funktion Nur Großbritannien Automatisches Neueinstellen eines SendersAF-Funktion Alternative Frequencies Alternativfrequenzen Empfangen von RegionalsendernActual total number Actual total number