EN
Locating the beginning of a track
—Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of (SEEK/AMS) momentarily.
|
|
|
| SEEK |
|
|
|
|
| AMS |
|
To locate the |
| To locate the | |||
preceding tracks |
| succeeding tracks | |||
Note
The AMS function may not work when:
•the blanks between tracks are shorter than 4 seconds.
•there is noise between tracks.
•there are long sections of low volume or quiet sections.
Changing the displayed items
Each time you press (DSPL) momentarily during tape playback, the displayed item changes as follows:
z Tape playback z Clock z Frequency* 
* While the AF/TA function activated.
Playing a tape in various modes
Searching for the desired track
—Intro scan
Press (1) during playback.
“INTRO” appears on the display.
The first 10 seconds of all the tracks are played.
When you find the desired track, press again. The unit returns to the normal playback mode.
Playing tracks repeatedly
—Repeat play
Press (2) during playback.
“REP” appears on the display.
When the current played track is over, it will be played again from the beginning.
To cancel this mode, press again.
Switching to the radio while fast- winding a tape
—Automatic Tuner Activation (ATA)
Press (5) during playback.
“ATA” appears on the display.
When
To cancel this function, press (5).
Skipping blanks during tape playback — Blank skip
Press (6) during playback.
“BL.SKIP” appears on the display.
Blanks longer than eight seconds will automatically be skipped during tape playback.
To cancel this function, press (6).
Playing a tape recorded in the Dolby B NR system
Press the (3) when you want to listen to a tape recorded in the Dolby* B NR system.
“a” appears on the display.
To cancel this function, press (3).
*Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY” and the
6