Changing the Illumination Color
INTRO
Press the 1 button while pressing the SEL button.
You can choose the color between amber and green.
Muting the Beep Tone
BL.SKIP
Press the 6 button while pressing the SEL button.
To obtain the beep tone again, press these buttons once more.
EN
14
Storing the Sound Characteristics of each Source
— Source Tone Memory Function
BANK
Press the 4 button while pressing the SEL button. n“STM” will appear on the display.
This function memorizes the adjusted sound characteristics (the bass, treble, and different between volume and sub output level) of each programme source. With this function, you can listen to the same source always in the same sound characteristics even after changing the programme source or tuning the unit off and on again.
To cancel the STM function, press these buttons again.
Enjoying Bass and Treble even at Low Volume
— Loudness Function
Press the 7 button while pressing the SEL button. n“LOUD” will appear on the display.
Bass and treble will be reinforced. To cancel, press these buttons again.
Changing the Brightness of the Display Window
Press the 9 button, while pressing the SEL button.
The display window Brightness will be dimmed.
To change to the original Brightness, press these buttons again.
Actual total number: | Sony |