The unit starts playing the tracks with “PLAY” settings which have been set by the PLAY/ SKIP edit mode.
Playing the tracks with “SKIP” settings.
Press the | BANK | button several times until you |
4 |
get the “B.INV ON” indication.
The unit starts playing the tracks with “SKIP” settings which have been set by the PLAY/ SKIP edit mode.
To go back to the normal playing mode, press
the | BANK | button several times until you get the | ||||||
4 | ||||||||
“B.INV OFF” indication. |
|
|
|
| ||||
|
|
|
| BANK |
|
|
|
|
Each time you press the 4 | button, the display | |||||||
on the display window changes as follows: | ||||||||
|
| z BANK ON | z B.INV ON |
| z B.INV OFF |
|
| |
|
|
|
|
|
|
|
|
|
EN
Note
Even when you play a disc with the PLAY/SKIP settings, if the “BANK” indication has not appeared on the display window, the disc will not be played according to the settings.
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one with the correct amperage which is stated on the fuse case. Never use a fuse whose amperage rating exceeds the one supplied to the unit as this could cause a malfunction of the unit.
Warning
Use a fuse with the specified amperage.
Use of a fuse with higher amperage may cause serious damage.
Cleaning the Connectors
The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, open the front panel by pressing the RELEASE button, then detach it and clean with a cotton swab which was dipped in alcohol. Do not apply too much force. Otherwise, the connector may get damaged.
Main unit
Back of the front panel
24
Actual total number: | Sony |