THORENS 550 user manual Mounting and set-up

Mounting and set-up

Carefully remove the unit and its accessories from the packaging.

Supplied items: 1 x plinth (with/without tonearm) 1 x Thorens drive belt

1 x platter

1 x felt mat

1 x power supply with power cord

1 x ground lead

1 x set of RCA interconnecting leads

1 x acryl dust cover

1 x sprit level (bubble)

1 x tonearm balancing gauge

1 x Allen-key SW3

3 x thumb screws for adjusting

1 x adaptor for single records

For the record player‘s mounting and set-up it is important to observe the following instructions.

Fig. 2

Put the plinth of the TD 550 onto a level surface as close as possible to your audio amplifier. You may verify its level position with the help of the supplied spirit level (bubble). By means of the three large thumb screws (Fig. 2) on top of the plinth the unit feet can be adjusted in height.

28