Nikon user manual Overview, Using the WP-CP2

Page 11

Introduction

Overview

Using the WP-CP2

Follow these steps when using the waterproof case:

Check for Leaks

( 6–7)

Important!

To prevent water damage to the camera, be sure to check for leaks before placing the camera in the case.

If water enters the case, check the O-ring and conﬁrm that the case is properly sealed ( 10).

Insert the Camera

( 8–11)

2. Insert the camera

1. Ready the camera

3. Insert desiccant

4. Perform a ﬁnal check

5. Close the case

4

Image 11

Contents User’s Manual Waterproof CaseTurn camera off immediately in the event of malfunction For Your SafetyDo not dive while holding Iii Temperature Table of Contents Life-Long Learning Important Use Only with Compatible CamerasIntroduction Package ContentsAttaching the Strap Parts of the WP-CP2Introduction Overview Using the WP-CP2Take Pictures 13-14 Check for Leaks Check for Leaks See the camera Guide to Digital Photography Insert the CameraBatteries Opening the Case Insert the CameraReplacing the Desiccant Insert DesiccantPerform a Final Check Close the Case Check for Leaks Again Turn the Camera On Adjust SettingsTake Pictures Underwater Photography Take PicturesDon’t Block the Shot Use the MonitorRemoving the Camera Clean the CaseDrying the Case Do Not Exposure to Sunlight or Heat Cleaning the Interior of the CaseReplacing the O-ring MaintenanceCaring for the O-ring Do Not Use Force or Sharp ObjectsGrease the O-ring CleaningSpeciﬁcations Optional AccessoriesTechnical Notes Storage