Nikon WP-CP2 user manual Table of Contents

Page 6

Table of Contents
For Your Safety		i
Cautions		iii
Notices		vi
Introduction		1
Package Contents		1
Parts of the WP-CP2		2
Overview		4
	Check for Leaks	6
	Insert the Camera	8
1.	Ready the Camera	8
2.	Insert the Camera	9
3.	Insert Desiccant	10
4.	Perform a Final Check	10
5.	Close the Case	11
	Check for Leaks Again	12
	Take Pictures	13
1.	Turn the Camera On	13
2.	Adjust Settings	13
3.	Take Pictures	14
	Clean the Case	15
Maintenance		17
Caring for the O-ring		17
Storage		19
Technical Notes		19
Speciﬁcations		19
Optional Accessories		19

v

Image 6

Contents Waterproof Case User’s ManualFor Your Safety Turn camera off immediately in the event of malfunctionDo not dive while holding Iii Temperature Table of Contents Important Use Only with Compatible Cameras Life-Long LearningPackage Contents IntroductionParts of the WP-CP2 Attaching the StrapIntroduction Using the WP-CP2 OverviewTake Pictures 13-14 Check for Leaks Check for Leaks Insert the Camera BatteriesSee the camera Guide to Digital Photography Insert the Camera Opening the CaseInsert Desiccant Perform a Final CheckReplacing the Desiccant Close the Case Check for Leaks Again Adjust Settings Take PicturesTurn the Camera On Use the Monitor Take PicturesDon’t Block the Shot Underwater PhotographyClean the Case Drying the CaseRemoving the Camera Cleaning the Interior of the Case Do Not Exposure to Sunlight or HeatDo Not Use Force or Sharp Objects MaintenanceCaring for the O-ring Replacing the O-ringCleaning Grease the O-ringStorage Optional AccessoriesTechnical Notes Speciﬁcations