Nikon WP-CP2 user manual Insert the Camera, Batteries, See the camera Guide to Digital Photography

Page 15

Insert the Camera

	Insert	1. Ready the Camera
	Insert	Insert the battery and memory card
	the	Insert the battery and memory card
	the	Before using the camera, check the battery level
	Camera	Before using the camera, check the battery level
		and number of exposures remaining.
		Batteries
		Make sure that the battery is undamaged. Failure
		to observe this precaution could result in ﬁre or
		in damage to the camera. For more information,
		see the camera Guide to Digital Photography.

Remove the Camera Strap

To ensure that the camera strap does not get caught in the seal and cause a leak, be sure to remove the strap before placing the camera in the case.

8

Image 15

Contents User’s Manual Waterproof CaseTurn camera off immediately in the event of malfunction For Your SafetyDo not dive while holding Iii Temperature Table of Contents Life-Long Learning Important Use Only with Compatible CamerasIntroduction Package ContentsAttaching the Strap Parts of the WP-CP2Introduction Overview Using the WP-CP2Take Pictures 13-14 Check for Leaks Check for Leaks Insert the Camera BatteriesSee the camera Guide to Digital Photography Opening the Case Insert the CameraInsert Desiccant Perform a Final CheckReplacing the Desiccant Close the Case Check for Leaks Again Adjust Settings Take PicturesTurn the Camera On Underwater Photography Take PicturesDon’t Block the Shot Use the MonitorClean the Case Drying the CaseRemoving the Camera Do Not Exposure to Sunlight or Heat Cleaning the Interior of the CaseReplacing the O-ring MaintenanceCaring for the O-ring Do Not Use Force or Sharp ObjectsGrease the O-ring CleaningSpeciﬁcations Optional AccessoriesTechnical Notes Storage