Nikon WP-CP2 user manual Do Not Exposure to Sunlight or Heat, Cleaning the Interior of the Case

Page 23

Clean the Case

Wipe dry

Dry the case thoroughly with a soft, dry cloth. Do not use a cloth to which salt has adhered.

Let the case dry in the shade

Leave the case out to dry in a shady, well-venti- lated area.

Do Not Exposure to Sunlight or Heat

Do not use a hair dryer or other heat source or place the case in direct sunlight. Heat could cause the O-ring to deteriorate, resulting in leakage.

Cleaning the Interior of the Case

Use a blower or a soft, dry cloth to clean the interior of the case. Do not use water, detergents, or chemical agents of any kind. Water can damage the coating on the inside of the lens window.

16

Image 23

Contents User’s Manual Waterproof CaseTurn camera off immediately in the event of malfunction For Your SafetyDo not dive while holding Iii Temperature Table of Contents Life-Long Learning Important Use Only with Compatible CamerasIntroduction Package ContentsAttaching the Strap Parts of the WP-CP2Introduction Overview Using the WP-CP2Take Pictures 13-14 Check for Leaks Check for Leaks See the camera Guide to Digital Photography Insert the CameraBatteries Opening the Case Insert the CameraReplacing the Desiccant Insert DesiccantPerform a Final Check Close the Case Check for Leaks Again Turn the Camera On Adjust SettingsTake Pictures Underwater Photography Take PicturesDon’t Block the Shot Use the MonitorRemoving the Camera Clean the CaseDrying the Case Do Not Exposure to Sunlight or Heat Cleaning the Interior of the CaseReplacing the O-ring MaintenanceCaring for the O-ring Do Not Use Force or Sharp ObjectsGrease the O-ring CleaningSpeciﬁcations Optional AccessoriesTechnical Notes Storage