Nikon WP-CP2 user manual Take Pictures 13-14

Page 12

Check for Leaks Again

( 12)

If water enters the case, check the O-ring and conﬁrm that the case is properly sealed ( 10). If the cause of the leak can not be determined, take the case to a Nikon-authorized service rep- resentative.

Take Pictures

( 13–14)

1.Turn the camera on

2.Adjust settings

3.Take pictures

Clean the Case

( 15–16)

1.Wash the case in fresh water

2.Wipe dry

3.Remove the camera

4.Soak the case in fresh water

5.Wipe dry

6.Let the case dry in the shade

Maintenance	(		17–19)

• Caring for the O-ring

• Storage

Introduction

5

Image 12

Contents Waterproof Case User’s ManualFor Your Safety Turn camera off immediately in the event of malfunctionDo not dive while holding Iii Temperature Table of Contents Important Use Only with Compatible Cameras Life-Long LearningPackage Contents IntroductionParts of the WP-CP2 Attaching the StrapIntroduction Using the WP-CP2 OverviewTake Pictures 13-14 Check for Leaks Check for Leaks Insert the Camera BatteriesSee the camera Guide to Digital Photography Insert the Camera Opening the CaseInsert Desiccant Perform a Final CheckReplacing the Desiccant Close the Case Check for Leaks Again Adjust Settings Take PicturesTurn the Camera On Take Pictures Don’t Block the ShotUse the Monitor Underwater PhotographyClean the Case Drying the CaseRemoving the Camera Cleaning the Interior of the Case Do Not Exposure to Sunlight or HeatMaintenance Caring for the O-ringDo Not Use Force or Sharp Objects Replacing the O-ringCleaning Grease the O-ringOptional Accessories Technical NotesStorage Speciﬁcations