Nikon WP-CP2 Take Pictures, Don’t Block the Shot, Use the Monitor, Underwater Photography

Page 21

3. Take Pictures

Take Pictures

Zoom out Zoom in

Ready the camera

Hold the case steadily in both hands.

Don’t Block the Shot

Keep fingers and other objects away from the lens window and diffusion panel.

Frame the picture

Use the zoom buttons on the case to frame the subject in the monitor.

Use the Monitor

The viewfinder can not be used when the cam- era is in the case. Use the monitor to frame pictures.

Focus and shoot

Press the shutter-release button on the case half- way to focus. Smoothly press the button the rest of the way down to shoot. Pictures can be played back using the button on the case.

Underwater Photography

The best time for underwater photography is when the sun is directly overhead (note that pictures taken underwater may have a blue cast). While shooting, avoid exhaling bubbles into the frame.

Close-up shots can be taken at ranges of as little as 4 cm (1.6˝) when the camera is zoomed out to where the icon in the monitor turns green. Note that the flash may be unable to light the entire subject when the camera is zoomed out, and its range may vary with depth and clarity. It may also reflect from suspended materials, producing brights spots in the picture. Take a test shot and view the results in the monitor.

Reactivating the Monitor

If the monitor has turned off to save power, it can be reactivated by pressing the power button or by pressing the shutter-release button halfway. By default, the monitor will turn off automatically if no operations are performed for one minute. The length of time the monitor remains active can be adjusted using the Auto off option in the camera setup menu.

14

Image 21
Contents User’s Manual Waterproof CaseTurn camera off immediately in the event of malfunction For Your SafetyDo not dive while holding Iii Temperature Table of Contents Life-Long Learning Important Use Only with Compatible CamerasIntroduction Package ContentsAttaching the Strap Parts of the WP-CP2Introduction Overview Using the WP-CP2Take Pictures 13-14 Check for Leaks Check for Leaks Insert the Camera BatteriesSee the camera Guide to Digital Photography Opening the Case Insert the CameraInsert Desiccant Perform a Final CheckReplacing the Desiccant Close the Case Check for Leaks Again Adjust Settings Take PicturesTurn the Camera On Don’t Block the Shot Take PicturesUse the Monitor Underwater PhotographyClean the Case Drying the CaseRemoving the Camera Do Not Exposure to Sunlight or Heat Cleaning the Interior of the CaseCaring for the O-ring MaintenanceDo Not Use Force or Sharp Objects Replacing the O-ringGrease the O-ring CleaningTechnical Notes Optional AccessoriesStorage Specifications