Nikon WP-CP2 user manual Take Pictures, Turn the Camera On, Adjust Settings

Page 20

Take Pictures

1. Turn the Camera On

Press the power switch on the waterproof case. The camera power-on lamp will light and the monitor will turn on.

2. Adjust Settings

The controls on the case correspond to the following camera controls. For more information, see the camera Guide to Digital Photography.

Mode dial

Zoom buttons

Multi selector

(playback) button

MENU button

(delete) button

13

Image 20

Contents Waterproof Case User’s ManualFor Your Safety Turn camera off immediately in the event of malfunctionDo not dive while holding Iii Temperature Table of Contents Important Use Only with Compatible Cameras Life-Long LearningPackage Contents IntroductionParts of the WP-CP2 Attaching the StrapIntroduction Using the WP-CP2 OverviewTake Pictures 13-14 Check for Leaks Check for Leaks See the camera Guide to Digital Photography Insert the CameraBatteries Insert the Camera Opening the CaseReplacing the Desiccant Insert DesiccantPerform a Final Check Close the Case Check for Leaks Again Turn the Camera On Adjust SettingsTake Pictures Take Pictures Don’t Block the ShotUse the Monitor Underwater PhotographyRemoving the Camera Clean the CaseDrying the Case Cleaning the Interior of the Case Do Not Exposure to Sunlight or HeatMaintenance Caring for the O-ringDo Not Use Force or Sharp Objects Replacing the O-ringCleaning Grease the O-ringOptional Accessories Technical NotesStorage Speciﬁcations