Nikon WP-CP2 user manual Insert Desiccant, Perform a Final Check, Replacing the Desiccant

Page 17

Insert the Camera

3. Insert Desiccant

To prevent condensation from forming inside the case, insert the silica gel desiccant between the bottom of the camera and the case. Slide the desiccant to the front of the case, where it will not interfere with proper closing of the case. Im- proper placement could cause the case to leak.

Replacing the Desiccant

Used desiccant loses its ability to absorb moisture. We recommend replacing the desiccant each time the case is used ( 19).

4. Perform a Final Check

Is the O-ring cracked or damaged?

Is the O-ring twisted or out of position?

Is the O-ring free of hair, dust, sand, and other foreign objects?

Is the camera in the correct orientation?

Has the camera strap been removed?

Is the desiccant correctly placed?

Are the O-ring seal and watertight

 

channel free of hair, dust, sand, and

 

other foreign objects?

10

Image 17
Contents User’s Manual Waterproof CaseTurn camera off immediately in the event of malfunction For Your SafetyDo not dive while holding Iii Temperature Table of Contents Life-Long Learning Important Use Only with Compatible CamerasIntroduction Package ContentsAttaching the Strap Parts of the WP-CP2Introduction Overview Using the WP-CP2Take Pictures 13-14 Check for Leaks Check for Leaks See the camera Guide to Digital Photography Insert the CameraBatteries Opening the Case Insert the CameraReplacing the Desiccant Insert DesiccantPerform a Final Check Close the Case Check for Leaks Again Turn the Camera On Adjust SettingsTake Pictures Don’t Block the Shot Take PicturesUse the Monitor Underwater PhotographyRemoving the Camera Clean the CaseDrying the Case Do Not Exposure to Sunlight or Heat Cleaning the Interior of the CaseCaring for the O-ring MaintenanceDo Not Use Force or Sharp Objects Replacing the O-ringGrease the O-ring CleaningTechnical Notes Optional AccessoriesStorage Specifications