Olympus PT-017 manual Install the O-ring

Use a clean cloth (that doesn't shed fibers), a toothbrush, tissue paper or the like, to remove any foreign matter from the O-ring groove.

CAUTION ：・When a mechanical pencil or a similar other sharp object is used to remove the O-ring or to clean the inside of the O- ring groove, the Case and the O-ring may be damaged and water leakage may be caused.

・When the O-ring is checked with the fingertips, take care not to stretch the O-ring.

・Never use alcohol, thinner, benzene or similar solvents or chemical detergents to clean the O-ring. When such chemicals are used, it is likely that the O-ring will be damaged or that its deterioration will be accelerated.

Install the O-ring.

Confirm that no foreign matter is attached, apply a thin coat of the accessory grease to the O-ring, and fit the O-ring into the groove. At this time, confirm that the O-ring does not stick out from the groove.

E-27