English
2.Aim the LDM at the desired target.
3.Press the DIST (ON) button (E) once to measure the first distance.
4.Press the + or – button (K, J) to activate the add or subtract function. The + or – will show in the display.
5.Press the DIST (ON) button again to add or subtract the second measurement. The calculated results show in the main reading line. The second measurement will show in the additional reading line.
TO SELECT UNITS OF MEASURE UNITS (FIG. 3)
The LDM switches to the next unit of measure each time the button is pressed.
TO MEASURE AREA (FIG. 7)
1.Turn the LDM on.
2.Press the area measure button (I). The area icon will display.
FIG. 7 |
3.Aim the LDM at the first desired target, as shown. Press the DIST (ON) button (E) once to record the first distance.
6
4.Aim the LDM at the second desired target and press the DIST (ON) button (E) once to record the second distance.
5.The calculated area is displayed in the main reading line (S). The second measurement is displayed in the additional reading line (P).
NOTE: The final measurement is displayed as square feet or square meters.
TO MEASURE ROOM VOLUME (FIG. 8)
1.Turn the LDM on.
2.Press the volume measure button (H). The volume icon will display.
3.Aim the LDM at the first desired target, as shown. Press the DIST (ON) button (E) once to record the first distance.
FIG. 8
4.Aim the LDM at the second desired target and press the DIST (ON) button (E) once to record the second distance.