Ericsson R290 manual To Store Your Own Telephone Number, To Edit a Number from Memory Store

Page 31

To Store Your Own Telephone Number

The phone can store up to 5 of your own numbers. Normally only 1 is required, which is the number used to make speech calls with the phone. However, you may also have different numbers for other services such as data and fax. The five available stores are accessed as sub-stores to memory store 0.

1.Press and hold MEM for at least half a second. Enter details and Scroll down to ‘ Store?’.

2.Enter 0 and press YES. The display will show:

3.Enter a digit from 1 to 5 and press YES to store your own number.

4.To clear a memory store, Press and hold MEM, scroll down to ‘Store?’, enter the store number followed by YES.

To Read and Recall a Telephone Number from the Phone Book Store

To recall a number store in any of your memory stores, press MEM for less than half a second. The following screen will be displayed:

R290 User’s Guide

To recall by the name associated with the desired number, enter the name, or part of it, in the ‘Name?’ line and press either MEM or YES. To recall by the store number, move to the ‘ Store?’ line and enter the one or two digit number followed by MEM or YES. Alternatively, precede the number with one or two zeros to make a 3 digit number and the contents will be recalled automatically. An example of the display is:

If there are up and down arrows on the screen, you can scroll through the telephone stores, by using the SOFT LEFT/RIGHT keys, or hold down the soft keys for at least half a second for automatic scrolling. If you have used a name to recall the stores, they will be scrolled through alphabetically. If a store number has been used, scrolling will be carried out numerically.

If the telephone number is more than 12 digits long, only 11 digits will be shown on the screen. Use the <* and #> keys to view the rest of the number.

To dial the selected number, press YES.

To Edit a Number from Memory Store

This feature allows you to quickly select an existing telephone number, change it into one that is similar and then dial it.

Recall the memory store by the name or store number. Only the telephone number may be edited and any changes that are made will not be automatically saved in the memory store.

23

Image 31
Contents Ericsson R290 Satellite Innovatron Patents Product Care and Maintenance Safety InstructionsGuidelines for Safe and Efficient Use Blasting Areas DrivingElectronic Devices AircraftBattery Information Please note Recycling Your BatteryContents Warranty Introduction SIM Card About Your PhoneGlobalstar/GSM Operators & SubscriptionsPhone Operating Without a SIM Card Preparing Your Phone for UseInserting the SIM Card Charging the Battery BatteryR290 User’s Guide Antenna Disconnecting the ChargerWhen to Charge the Battery Low Battery AlarmTurning Off the Phone Use with Portable Hands Free Globalstar ModeUse with Mobile Office Globalstar Mode Turning On the PhoneNavigating the Menu System Display Text and SymbolsTerms Used Icon Function Indicators in the DisplayInitial Phone Settings Selecting a Network Searching for a NetworkStand-by display Making and Receiving Calls Calling Line Identification CLI Receiving a CallAnswering a Call Rejecting a CallHandling Two Calls Useful Information while Talking To Redial the Last Dialled Number To Change the Ring VolumeTo Change Key Tone Volume Using Auto-RedialTo dial the last 10 numbers dialled, received or missed Missed CallsMaking/Answering a Call with Call Bar Active Notification that a Call has been DivertedSpeed Dialling Using the Phone BookAbout the Phone Book International NumbersTo Store a Name and a Number into a Selected Memory Store Upper Case ModeLower Case Mode To Edit a Number from Memory Store To Store Your Own Telephone NumberLast Number Stores To Display your Own Telephone NumberDialled Store Missed Store Last Number RedialPause Dialling Received StoreLast Call Sending Dtmf Tones During a CallOne-Touch Dialling Call Duration and CostCall Cost Setup To Reset the Call Time/Cost CountersAll Calls To Setup the Unit Time for Calls ‘ Cost Limit Approaching’ being displayed To set the maximum costBusy Numbers Personalizing Your PhoneRing Tone Ring VolumeTo Complete a Ccbs Call Caller ID Escalating Ring VolumeConnect ID Clock Automatic Display of Call TimeAuto Answer GreetingsSet Date Clock ModeDate Mode Set TimeTo Choose a Language Satellite Synchronisation ModeLanguage Mode LanguageVisual Indicator Usage Power SaveBacklight Operation Fixed Dialled Number Store Handsfree Automatic Shutdown TimerVoice Mail Protecting Your Phone Setting the Keypad LockAbout Locks Phone Lock PIN To Enable the Phone PINTo unlock the keypad Unblocking with Personal Unblocking Key PUK To Disable the Phone PINTo Change the Phone PIN Card Lock SIM PIN To Enable the SIM PIN LockTo change the SIM PIN To Review the Call Divert Status To Disable the SIM PIN LockControlling Your Calls Call DivertTo Setup Call Divert Notification that a Call has been Diverted Call WaitingTo Remove Call Diversion To Check the Call Wait Status To Cancel Call WaitingTo Set Call Waiting Placing a Second Call and holding the Current Call Switching between Active Call and Call on HoldDealing with Multiple Calls Call Waiting In-Call MenuTo Create a Conference Call Placing a Call when the Called Party is EngagedConference Calls Call Termination by Calling Party with another Call HeldTo Review the Participants in a Conference Call Remote Party Notification Call Control Public MMI Commands SummaryTo Disconnect a Remote Party from a Conference Call Call Hold and Call Termination by a Remote PartyTo Check the Call Bar Status Call BarringTo Set Incoming Call Barring To Set Outgoing Call BarringTo Cancel Incoming Call Barring To Cancel Outgoing Call BarringTo Change the Network Password for Call Barring Checking Subscription Quick access to unread messagesSending And Receiving Text Messages Receiving a MessageDeleting a Message To Read a MessageSaving and Dialling a Number Received in a Message Clearing Messages Automatically To Select Message TonesSending a Message Displaying Priority Messages ImmediatelyTo Originate a New Message To Enter Message Text To Enter the Service Centre NumberTo Enter the Destination Address To Create a Message from an Existing Message To Enter the Validity PeriodTo Select the Message Type To Review Your Newly Created MessageTo Delete a Message To Send the Completed MessageTo Save a Message To Return to the Current Message and complete itTo Check on the Status of the Last Message Sent To Set the Message Parameter DefaultsConditions WarrantyOur Warranty What We Will DoPatents R290 User’s Guide Index PIN