Ericsson R290 Call Waiting, Notification that a Call has been Diverted, To Remove Call Diversion

Page 52

R290 User’s Guide

accompanied by the RADIO PATH ACKNOWLEDGEMENT TONE in the earpiece.

The phone will then return to the stand-by display. It is possible to have more than one call diversion option set at any one time, i.e. each option can be set and cancelled individually (including Divert All Calls).

Notification that a Call has been Diverted

The network may inform the relevant parties when a call has been diverted and the RADIO PATH ACKNOWLEDGEMENT TONE will be played.

If the incoming call information includes a Calling Line Identification Presentation (CLIP) number, this will be displayed before the notification that a call has been diverted.

A notification message may also be sent if call diversion is active when an outgoing call is made. The display will show:

To Remove Call Diversion

1.Press SOFT LEFT, 5 to enter Advanced menu.

2.Press 1 for Divert menu.

3.Press 3 for Cancel.

4.Press 1 or YES to cancel divert all calls, 2 to cancel divert a call when the phone is engaged, 3 to cancel divert incoming calls if you are not available, 4 to cancel divert incoming calls when the phone is switched off.

5.Select the basic service group for which the call diversion is to be cancelled. The display will show:

6.Press 1 for All Calls, 2 for Voice Only, 3 for Data Only or 4 for Fax Only.

7.The display will show the message ‘Please Wait’ and then ‘ Request Accepted’ will be displayed. The RADIO ACKNOWLEDGEMENT TONE will be played through the earpiece. The phone will then return to the stand-by display.

Call Waiting

Call Wait is a network subscription option which allows an incoming call to be held waiting when you are already in a call. If this option is not available or not activated, new calls trying to reach you when you are busy will be rejected and there will be no notification that you were being called.

Call Hold is a network subscription option that allows a call to be placed on hold when accepting a waiting call, or to start a new outgoing call. If the network allows, the party being placed on hold may be sent notification that their call is being put on hold. The notifications may be an audible announcement and the message On hold will be displayed on the screen. The calling party may also be sent notification when the call becomes active again.

You can retrieve a call from hold if the active call has ended or the active and held calls are switched.

44

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Ericsson R290 Satellite Innovatron Patents Product Care and Maintenance Safety InstructionsGuidelines for Safe and Efficient Use Driving Electronic DevicesAircraft Blasting AreasBattery Information Recycling Your Battery Please noteContents Warranty Introduction About Your Phone Globalstar/GSMOperators & Subscriptions SIM CardPhone Operating Without a SIM Card Preparing Your Phone for UseInserting the SIM Card Battery Charging the BatteryR290 User’s Guide Disconnecting the Charger When to Charge the BatteryLow Battery Alarm AntennaUse with Portable Hands Free Globalstar Mode Use with Mobile Office Globalstar ModeTurning On the Phone Turning Off the PhoneNavigating the Menu System Display Text and SymbolsTerms Used Indicators in the Display Icon FunctionInitial Phone Settings Searching for a Network Selecting a NetworkStand-by display Making and Receiving Calls Receiving a Call Answering a CallRejecting a Call Calling Line Identification CLIHandling Two Calls Useful Information while Talking To Change the Ring Volume To Change Key Tone VolumeUsing Auto-Redial To Redial the Last Dialled NumberMissed Calls Making/Answering a Call with Call Bar ActiveNotification that a Call has been Diverted To dial the last 10 numbers dialled, received or missedUsing the Phone Book About the Phone BookInternational Numbers Speed DiallingUpper Case Mode To Store a Name and a Number into a Selected Memory StoreLower Case Mode To Store Your Own Telephone Number To Edit a Number from Memory StoreLast Number Stores To Display your Own Telephone NumberDialled Store Last Number Redial Pause DiallingReceived Store Missed StoreSending Dtmf Tones During a Call One-Touch DiallingCall Duration and Cost Last CallCall Cost Setup To Reset the Call Time/Cost CountersAll Calls To Setup the Unit Time for Calls To set the maximum cost ‘ Cost Limit Approaching’ being displayedPersonalizing Your Phone Busy NumbersRing Tone Ring VolumeTo Complete a Ccbs Call Caller ID Escalating Ring VolumeConnect ID Automatic Display of Call Time Auto AnswerGreetings ClockClock Mode Date ModeSet Time Set DateSatellite Synchronisation Mode Language ModeLanguage To Choose a LanguageVisual Indicator Usage Power SaveBacklight Operation Fixed Dialled Number Store Handsfree Automatic Shutdown TimerVoice Mail Protecting Your Phone Setting the Keypad LockAbout Locks Phone Lock PIN To Enable the Phone PINTo unlock the keypad Unblocking with Personal Unblocking Key PUK To Disable the Phone PINTo Change the Phone PIN Card Lock SIM PIN To Enable the SIM PIN LockTo change the SIM PIN To Disable the SIM PIN Lock Controlling Your CallsCall Divert To Review the Call Divert StatusTo Setup Call Divert Notification that a Call has been Diverted Call WaitingTo Remove Call Diversion To Check the Call Wait Status To Cancel Call WaitingTo Set Call Waiting Switching between Active Call and Call on Hold Dealing with Multiple CallsCall Waiting In-Call Menu Placing a Second Call and holding the Current CallPlacing a Call when the Called Party is Engaged Conference CallsCall Termination by Calling Party with another Call Held To Create a Conference CallTo Review the Participants in a Conference Call Call Control Public MMI Commands Summary To Disconnect a Remote Party from a Conference CallCall Hold and Call Termination by a Remote Party Remote Party NotificationCall Barring To Check the Call Bar StatusTo Set Outgoing Call Barring To Set Incoming Call BarringTo Cancel Outgoing Call Barring To Cancel Incoming Call BarringTo Change the Network Password for Call Barring Quick access to unread messages Sending And Receiving Text MessagesReceiving a Message Checking SubscriptionDeleting a Message To Read a MessageSaving and Dialling a Number Received in a Message To Select Message Tones Clearing Messages AutomaticallySending a Message Displaying Priority Messages ImmediatelyTo Originate a New Message To Enter Message Text To Enter the Service Centre NumberTo Enter the Destination Address To Enter the Validity Period To Select the Message TypeTo Review Your Newly Created Message To Create a Message from an Existing MessageTo Send the Completed Message To Save a MessageTo Return to the Current Message and complete it To Delete a MessageTo Set the Message Parameter Defaults To Check on the Status of the Last Message SentWarranty Our WarrantyWhat We Will Do ConditionsPatents R290 User’s Guide Index PIN
Top Page Image Contents