Ericsson R290 manual Satellite Synchronisation Mode, Language Mode, To Choose a Language

Page 43

2. Press 4 to set Date Mode, current mode is shown with asterix.

3.The current date is presented in the currently selected date mode. Press SOFT LEFT and SOFT RIGHT to toggle round the options.

The possible options are:

Day-Month–Year	e.g. 19-05-99
Month/Day/Year	e.g. 05/19/99
YearMonthDay	e.g. 990519
Day-Month-Year	e.g. 19-May-99

Off

4. Press YES to select an option.

The current date is displayed in the appropriate confirmation mode for 4 seconds before returning to the Clock menu.

Satellite Synchronisation Mode

1.Press SOFT LEFT, 1, 4 to enter the Clock menu.

2.Press 5 to set Satellite Synchronisation Mode.

3.The following display will appear:

4. Press SOFT LEFT or SOFT RIGHT to change displayed offset, the time increments in 15 minutes steps to a maximum of 13 hours. When required figure is seen press YES.

A confirmation message ‘ Clock Synchronised’ will be displayed.

R290 User’s Guide

Language

The phone supports 12 languages for all display messages. The user has the option to select any one of these languages as desired.

When the phone is first used following factory initialisation, language selection is set to automatic. Consequently, the language will be selected automatically according to the SIM.

Language Mode

To access the Language Mode menu.

1.Press SOFT LEFT, then 1 to enter Setup menu.

2.Press 5 to show Language menu.

3. To enable Automatic Language Selection, press 1 or YES. To enable manual selection, press 2.

A confirmation message will be displayed before the phone returns to the Call Setup menu.

To Choose a Language

1.Press SOFT LEFT, then 1 to enter Setup menu.

2.Press 5 to show Language menu.

3.Press 2 to choose a new language manually.

4.Press SOFT LEFT or SOFT RIGHT to scroll through the available languages. Pressing and holding the keys for at least ½ second will automatically scroll through the available languages, pausing for ½ second on each.

35

Image 43

Contents Ericsson R290 Satellite Innovatron Patents Product Care and Maintenance Safety InstructionsGuidelines for Safe and Efficient Use Blasting Areas DrivingElectronic Devices AircraftBattery Information Please note Recycling Your BatteryContents Warranty Introduction SIM Card About Your PhoneGlobalstar/GSM Operators & SubscriptionsPhone Operating Without a SIM Card Preparing Your Phone for UseInserting the SIM Card Charging the Battery BatteryR290 User’s Guide Antenna Disconnecting the ChargerWhen to Charge the Battery Low Battery AlarmTurning Off the Phone Use with Portable Hands Free Globalstar ModeUse with Mobile Office Globalstar Mode Turning On the PhoneNavigating the Menu System Display Text and SymbolsTerms Used Icon Function Indicators in the DisplayInitial Phone Settings Selecting a Network Searching for a NetworkStand-by display Making and Receiving Calls Calling Line Identification CLI Receiving a CallAnswering a Call Rejecting a CallHandling Two Calls Useful Information while Talking To Redial the Last Dialled Number To Change the Ring VolumeTo Change Key Tone Volume Using Auto-RedialTo dial the last 10 numbers dialled, received or missed Missed CallsMaking/Answering a Call with Call Bar Active Notification that a Call has been DivertedSpeed Dialling Using the Phone BookAbout the Phone Book International NumbersTo Store a Name and a Number into a Selected Memory Store Upper Case ModeLower Case Mode To Edit a Number from Memory Store To Store Your Own Telephone NumberLast Number Stores To Display your Own Telephone NumberDialled Store Missed Store Last Number RedialPause Dialling Received StoreLast Call Sending Dtmf Tones During a CallOne-Touch Dialling Call Duration and CostCall Cost Setup To Reset the Call Time/Cost CountersAll Calls To Setup the Unit Time for Calls ‘ Cost Limit Approaching’ being displayed To set the maximum costBusy Numbers Personalizing Your PhoneRing Tone Ring VolumeTo Complete a Ccbs Call Caller ID Escalating Ring VolumeConnect ID Clock Automatic Display of Call TimeAuto Answer GreetingsSet Date Clock ModeDate Mode Set TimeTo Choose a Language Satellite Synchronisation ModeLanguage Mode LanguageVisual Indicator Usage Power SaveBacklight Operation Fixed Dialled Number Store Handsfree Automatic Shutdown TimerVoice Mail Protecting Your Phone Setting the Keypad LockAbout Locks Phone Lock PIN To Enable the Phone PINTo unlock the keypad Unblocking with Personal Unblocking Key PUK To Disable the Phone PINTo Change the Phone PIN Card Lock SIM PIN To Enable the SIM PIN LockTo change the SIM PIN To Review the Call Divert Status To Disable the SIM PIN LockControlling Your Calls Call DivertTo Setup Call Divert Notification that a Call has been Diverted Call WaitingTo Remove Call Diversion To Check the Call Wait Status To Cancel Call WaitingTo Set Call Waiting Placing a Second Call and holding the Current Call Switching between Active Call and Call on HoldDealing with Multiple Calls Call Waiting In-Call MenuTo Create a Conference Call Placing a Call when the Called Party is EngagedConference Calls Call Termination by Calling Party with another Call HeldTo Review the Participants in a Conference Call Remote Party Notification Call Control Public MMI Commands SummaryTo Disconnect a Remote Party from a Conference Call Call Hold and Call Termination by a Remote PartyTo Check the Call Bar Status Call BarringTo Set Incoming Call Barring To Set Outgoing Call BarringTo Cancel Incoming Call Barring To Cancel Outgoing Call BarringTo Change the Network Password for Call Barring Checking Subscription Quick access to unread messagesSending And Receiving Text Messages Receiving a MessageDeleting a Message To Read a MessageSaving and Dialling a Number Received in a Message Clearing Messages Automatically To Select Message TonesSending a Message Displaying Priority Messages ImmediatelyTo Originate a New Message To Enter Message Text To Enter the Service Centre NumberTo Enter the Destination Address To Create a Message from an Existing Message To Enter the Validity PeriodTo Select the Message Type To Review Your Newly Created MessageTo Delete a Message To Send the Completed MessageTo Save a Message To Return to the Current Message and complete itTo Check on the Status of the Last Message Sent To Set the Message Parameter DefaultsConditions WarrantyOur Warranty What We Will DoPatents R290 User’s Guide Index PIN