Ericsson Unlock Your Satellite Phone: A Complete Guide for R290 Users

Page 49

(and PUK 2) is a code that helps you unlock your phone when you have forgotten the PIN (PIN 2).

If you have entered the PIN incorrectly three times in a row enter the following from stand-by:

<* <* 0 5 <* SIM PIN1 Unblocking Key

Then enter the new number.

<* New SIM PIN1

Enter the new number again to confirm.

<* New SIM PIN1 #>

Card Lock (SIM PIN)

The card lock protects your SIM Card. When the card lock is active, you will always be prompted to enter your PIN at start-up.

To Enable the SIM PIN Lock

1.Press SOFT LEFT, 1 to enter Setup menu.

2.Press 2 for Security menu, then press 2.

R290 User’s Guide

3. Press 2 to select Enable.

4.Enter the 4 digit phone PIN and press YES. The message ‘ SIM PIN Enabled’ will be shown on the screen and the phone will return to the Setup menu.

To change the SIM PIN

You can only change the SIM PIN when it is enabled.

1.Press YES from the Phone PIN Options Menu to enter a new PIN. The display will show the message Enter Old SIM PIN.

2.Enter the old PIN digits and press YES. The display will show Enter

New SIM PIN.

3.Enter the new PIN digits and press YES. You may enter between 4 and 8 digits. The display will then show the message Confirm New

SIM PIN.

4.Enter the new PIN digits again and press YES. The display will show

New SIM PIN Accepted before returning to the Setup Menu.

If you make a mistake when confirming the PIN, the message SIM PIN Confirmation Error will be shown and you will be asked to re-enter the new PIN again.

When the PIN has been successfully confirmed, the phone will return to the Setup Menu.

NOTE:

If you enter the old PIN incorrectly, the message SIM PIN Error will be shown. If it is entered incorrectly three times, you will be notified that the PIN has become blocked.

41

Image 49

Contents Ericsson R290 Satellite Innovatron Patents Product Care and Maintenance Safety InstructionsGuidelines for Safe and Efficient Use Electronic Devices DrivingAircraft Blasting AreasBattery Information Please note Recycling Your BatteryContents Warranty Introduction Globalstar/GSM About Your PhoneOperators & Subscriptions SIM CardPhone Operating Without a SIM Card Preparing Your Phone for UseInserting the SIM Card Charging the Battery BatteryR290 User’s Guide When to Charge the Battery Disconnecting the ChargerLow Battery Alarm AntennaUse with Mobile Office Globalstar Mode Use with Portable Hands Free Globalstar ModeTurning On the Phone Turning Off the PhoneNavigating the Menu System Display Text and SymbolsTerms Used Icon Function Indicators in the DisplayInitial Phone Settings Selecting a Network Searching for a NetworkStand-by display Making and Receiving Calls Answering a Call Receiving a CallRejecting a Call Calling Line Identification CLIHandling Two Calls Useful Information while Talking To Change Key Tone Volume To Change the Ring VolumeUsing Auto-Redial To Redial the Last Dialled NumberMaking/Answering a Call with Call Bar Active Missed CallsNotification that a Call has been Diverted To dial the last 10 numbers dialled, received or missedAbout the Phone Book Using the Phone BookInternational Numbers Speed DiallingTo Store a Name and a Number into a Selected Memory Store Upper Case ModeLower Case Mode To Edit a Number from Memory Store To Store Your Own Telephone NumberLast Number Stores To Display your Own Telephone NumberDialled Store Pause Dialling Last Number RedialReceived Store Missed StoreOne-Touch Dialling Sending Dtmf Tones During a CallCall Duration and Cost Last CallCall Cost Setup To Reset the Call Time/Cost CountersAll Calls To Setup the Unit Time for Calls ‘ Cost Limit Approaching’ being displayed To set the maximum costBusy Numbers Personalizing Your PhoneRing Tone Ring VolumeTo Complete a Ccbs Call Caller ID Escalating Ring VolumeConnect ID Auto Answer Automatic Display of Call TimeGreetings ClockDate Mode Clock ModeSet Time Set DateLanguage Mode Satellite Synchronisation ModeLanguage To Choose a LanguageVisual Indicator Usage Power SaveBacklight Operation Fixed Dialled Number Store Handsfree Automatic Shutdown TimerVoice Mail Protecting Your Phone Setting the Keypad LockAbout Locks Phone Lock PIN To Enable the Phone PINTo unlock the keypad Unblocking with Personal Unblocking Key PUK To Disable the Phone PINTo Change the Phone PIN Card Lock SIM PIN To Enable the SIM PIN LockTo change the SIM PIN Controlling Your Calls To Disable the SIM PIN LockCall Divert To Review the Call Divert StatusTo Setup Call Divert Notification that a Call has been Diverted Call WaitingTo Remove Call Diversion To Check the Call Wait Status To Cancel Call WaitingTo Set Call Waiting Dealing with Multiple Calls Switching between Active Call and Call on HoldCall Waiting In-Call Menu Placing a Second Call and holding the Current CallConference Calls Placing a Call when the Called Party is EngagedCall Termination by Calling Party with another Call Held To Create a Conference CallTo Review the Participants in a Conference Call To Disconnect a Remote Party from a Conference Call Call Control Public MMI Commands SummaryCall Hold and Call Termination by a Remote Party Remote Party NotificationTo Check the Call Bar Status Call BarringTo Set Incoming Call Barring To Set Outgoing Call BarringTo Cancel Incoming Call Barring To Cancel Outgoing Call BarringTo Change the Network Password for Call Barring Sending And Receiving Text Messages Quick access to unread messagesReceiving a Message Checking SubscriptionDeleting a Message To Read a MessageSaving and Dialling a Number Received in a Message Clearing Messages Automatically To Select Message TonesSending a Message Displaying Priority Messages ImmediatelyTo Originate a New Message To Enter Message Text To Enter the Service Centre NumberTo Enter the Destination Address To Select the Message Type To Enter the Validity PeriodTo Review Your Newly Created Message To Create a Message from an Existing MessageTo Save a Message To Send the Completed MessageTo Return to the Current Message and complete it To Delete a MessageTo Check on the Status of the Last Message Sent To Set the Message Parameter DefaultsOur Warranty WarrantyWhat We Will Do ConditionsPatents R290 User’s Guide Index PIN