Star Trac 620-7920 manual Contact heart rate Hot Bar Stop

Page 21

Contact heart rate

Hot Bar

E-Stop

Step 12.

Connect the Hot Bar cable (i) to JP7 connector on the center console board.

Step 14.

plug and secure the coax cable (h) into the coax adapter on the tuner card of the embed- ded display assembly.

Step 13.

Connect the E-Stop cable (g) and the Contact Heart Rate cable (c) to respective connectors on the FitCpu board located on the back of embed- ded display.

DC Power

Step 15.

Now plug the DC power cable (a) from the base neck into DC connectors on the embedded dis- play assembly.

22	620-7920 Rev A

Image 21

Contents Work Instructions General Unpacking Instructions Verify components in box two 1.Neck cover Verify the following tools are included in the hardware kit Installation Instructions Step For E-TRxe model only Step Step Step Step LED Display Console Installation Instructions Step Step YOU have NOW Completed the E-TRx Treadmill Installation Once powered up, all features of the unit function properly This page Intentionally Left Blank Embedded Display Console Installation Instructions Coax cable Contact heart rate Hot Bar Stop Interface YOU have NOW Completed the Embedded Display Installation Rev a This page Intentionally Left Blank IPod Center Console Installation Instructions Screw Step Install the new iPod center console YOU have NOW Completed the iPod Center Console Installation Rev a This page Intentionally Left Blank MYE Entertainment Center Console Installation Instructions Screw Step Step YOU have NOW Completed the MYE Center Console Installation Rev a This page Intentionally Left Blank Personal Viewing Screen PVS Installation Instructions From PVS From Neck TR Headphone Hot Bar Headphone Jack assembly Step DC power jack Step Rev a Star Trac Star Trac Fitnesstm Settings and Testing Maintenance Mode Oper Hours Motor Calibration Elevation Calibration Troubleshooting