Use the checklist below to ensure the proper installation of the Treadmill:
1. All parts and hardware in the package are accounted for.
2. Embedded display assembly is clear of any scratches or damage.
3. All screws are tightened down to their specified values.
4. Display frame is properly mounted and secured to the neck and handrails.
5. Embedded display assembly is properly mounted and secured to the display frame.
6. The front and back display plastics are properly installed and secured.
7. Cable feed and power adaptor are plugged into the front base of the unit.
8. Unit is leveled to the floor.
9. Touch screen responds to commands as specified in the User’s Manual section regard- ing the Calibration and Setup.
10. Verify iPod menu is functioning and user can browse and listen to music and videos.
11. TV is setup properly per the owner’s manual, signal is clear and audio is coming from both earphones.
12. Using a chest strap or wireless heart rate simulator, verify heart rate is recording prop- erly.
ATTENTION
•Star Trac recommends that the treadmill be spaced a minimum of 20.0 inches (0.5 m) apart to allow safe and easy ingress and egress. Even more importantly, there must be at least 48 inches (1.25 m) of free space behind the treadmill.
•As with any motorized equipment, the area where treadmills are located must be free of obstruc- tions and fixtures with sharp edges to prevent injury in the event that a user trips or loses bal- ance and falls.
For technical assistance call Star Trac Customer Service: 1 800 503 1221
25 |
|