Star Trac 620-7920 manual Step

Step 13.

Select the E-TRx headphone mount from the kit and attach it to the available cut-out at the lower front of the hot bar, then secure with previously retained screw.

Step 15.

Take the headphone jack cable from the PVS neck and connect it to one end of the head- phone jack, then take the headphone jack cable from the Hot bar and connect it to the other end of the headphone jack.

Note: The headphone jacks on the audio board are interchangeable.

Step 14.

Take the E-TR headphone jack assembly from the kit and install it onto the back of the center console mount, then secure with (1) M4 screw.

Step 16.

Plug the center console’s keypad cable into J7 connector on the display board.

42 620-7920 Rev A