INSTALLATION INSTRUCTIONS
Step 1.
Lift the front motor shroud off of the frame as- sembly.
Note: Make sure the shroud is properly stored to prevent damage.
Step 3.
Position neck close to the service opening in the front of treadmill so the cables go into the opening first.
7
Step 2.
Remove the neck form shipping box and verify the cables are properly fed through attached protective tube in the base of the neck.
Note: The tube will protect cables from getting pinched during installation and will make it easier to route them through service opening.
Step 4.
Route all cables from neck into motor compart- ment through lower neck service opening.
Caution: Make sure not to pinch any cables.