Step 9.
Install the new PVS center console in place. Don’t secure console with screws yet.
Step 10.
Using a Phillips head screw driver, remove the screw that holds in the headphone jack cap at the lower front of the hot bar. Retain the screw.
Step 11.
Remove the headphone jack blank cover.
Note: You will no longer need the cover, and if de- sired, it can be stored away for any possible future use.
41
|
| Hot Bar Headphone |
jack assembly |
| jack assembly |
|
|
|
|
|
|
a |
| b |
Step 12.
Identify the two headphone board mounts that came with the kit:
a.
b.